Evaluation of the quality of cyanoacrylate adhesive joints using the example of poly(methyl methacrylate) and polycarbonate
Journal Title: UNKNOWN - Year 2017, Vol 14, Issue 1
Abstract
Adhesive bonding is one of the simplest and most common methods used for joining materials. It is applied in both production and repair works. The most commonly used adhesives are cyanoacrylates, due to the possibility of combining various materials and short curing time. One of the ways to assess the quality of the adhesive used is testing the shear strength of bonded joints. Three adhesives com-monly available on the Polish market, from various manufacturers and with different prices per gram of product were tested. The polymer materials bonded were poly(methyl methacrylate) and poly-cabonate, since they are broadly used in the automotive industry and household equipment. The study revealed significant differences in bonding strength, reaching as much as 38% The adhesive’s price was not commensurate with the quality of the product tested in all cases.<br/><br/>
Authors and Affiliations
Piotr Mazur
Keywords
Related Articles
- EP ID EP518590
- DOI DOI: 10.30657/pea.2017.14.02
- Views 44
- Downloads 0
Value Stream Mapping as Lean Production tool to improve the production process organization – case study in packaging manufacturing
In the paper, the method of the production process improvement with the use of lean production tools has been presented. The Value Stream Mapping (VSM) for the cardboard packaging produc-tion process has been presented....
Improving production of low pressure hoses
The paper presents the results of research carried out in one of the domestic companies producing rubber and plastics products for the automotive industry. The results of the evaluation of the quality control function du...
The delocalization of production to Poland
This paper presents some aspects of the process of services, products and manufacturing transfer, with the associated production resources, from other locations and plants to Poland. The study was carried out on the bas...
A brief overview and metallography for commonly used materials in aero jet engine construction
Aluminium, titanium, and nickel base alloys are mostly and widely used for aircraft jet engine con-struction. A proper evaluation of its microstructure is important from working safety point of view. To receive a well pr...
Mechanical and mathematical research of local deformations of a steel roller shell with a variable geometry of contact surface
The article is devoted to solving the fundamental and applied problem of nonlinear structural mechanics of machines by introducing into the drum two additional stop cylinders with supporting rollers at the end and adjust...