EXPERIMENTAL ANALYSIS ON THE EFFECT OF PROCESS PARAMETERS DURING CNC TURNING ON NYLON -6/6 USING TUNGSTEN CARBIDE TOOL
Journal Title: International Journal of Engineering Sciences & Research Technology - Year 30, Vol 5, Issue 4
Abstract
Quality and productivity of the machined parts are the main challenges of metal cutting industry during turning process. Therefore we should optimize and analyse the cutting parameters in such a way that the required surface quality can be controlled. Turning is the most widely material removal process in industrial area. It is important to study the effect of the cutting parameters on MRR and surface roughness to improve machinability. The purpose of this paper is to study the effect of speed, feed and depth of cut on surface roughness (Ra) and MRR in turning nylon- 6/6 using tungsten carbide tool. Experiments were conducted on a CNC lathe and the influence of cutting parameters was studied using analysis of variance (ANOVA). Based on the main effects plots obtained optimum level for surface roughness was chosen from the three levels of cutting parameters considered. From the experiment it is found that feed, depth of cut, and the interaction of feed and depth of cut significantly influenced the variance. We have calculated the main effects and percentage contribution of various process parameters affecting surface roughness also determined.
Authors and Affiliations
Manas Ranjan Panda*,
Keywords
Related Articles
- EP ID EP164436
- DOI 10.5281/zenodo.48828
- Views 71
- Downloads 0
Congestion Management by TCPST In IEEE 9 Bus System Using Matlab Simulink
Increased electric power consumption causes transmission lines to be driven close to or even beyond their transfer capacities resulting in overloaded lines and congestions. Flexible AC Transmission Systems (FACTS) prov...
Human Ear Biometric Authentication System
The ear, as a biometric, has been given less attention, while comparing with other biometrics such as fingerprint, face, Iris. Since it is a relatively new biometric, no commercial applications involving ear recog...
Bone Quality Assessment Using MEMS Accelerometer
Bone Mineral Density (BMD) is the amount of mineral per square centimeter of bone. Osteoporosis is defined as a systemic skeletal disease characterized by low bone mass and micro architectural deterioration of bone tiss...
NUMERICAL SIMULATION OF TRUNCATED PYRAMIDAL CUPS OF AA1050-H18 ALLOY FABRICATED BY SINGLE POINT INCREMENTAL FORMING
The purpose of the present project work was to understand the formability of AA1050-H18 alloy to fabricate truncated pyramidal cups using single point incremental forming (SPIF) process. The finite element analysis has b...
AN ANALYTICAL APPROACH FOR DETERMINATION OF JOINT SHEAR DEMAND IN EXTERIOR BEAM-COLUMN JOINT USING STAAD.PRO
History has seen much destruction of structures due to joint failures during earthquakes. Beam-column joint failure is the major cause for such destructions. Therefore major concern is given in refurnishing their...