EXPERIMENTAL APPROBATION OF AN ELECTRODYNAMIC DIRECT ELECTRIC SYSTEM FOR EXTERNAL AUTOMOBILE BODY REPAIR
Journal Title: Електротехніка і Електромеханіка - Year 2014, Vol 0, Issue 4
Abstract
The article presents results of experimental research on an electrodynamic system with direct current flow for external automobile body repair. A possibility of specifying the direction of increasing magnetic pulse attraction force action efficiency is shown. Operability of the external magnetic pulse flattening tool introduced is shown.
Authors and Affiliations
A. Yu. Bondarenko, V. B. Finkelshtein, A. A. Stepanov
Keywords
Related Articles
- EP ID EP301836
- DOI 10.20998/2074-272X.2014.4.09
- Views 72
- Downloads 0
METHODOLOGY OF DETERMINATION OF QUALITY INDEX OF MAINTENANCE SERVICE SYSTEM OF POWER EQUIPMENT OF TRACTION SUBSTATIONS
Purpose. The purpose of this paper is development of methodology for definition of a quality system of maintenance and repair (M and P) power equipment of traction substations (TS) of electrified railways operating under...
EXPERIMENTAL RESEARCH OF THE POWER FREQUENCY TECHNOGENIC MAGNETIC FIELD ACTIVE SCREENING IN SYSTEM WITH DIFFERENT CONTROL ALGORITHMS AND WITH A SINGLE COIL
Purpose. Development of methodology and experimental studies of the layout of the active screening of technogenic power frequency magnetic fields with different control algorithms with a single coil magnetic executive bo...
AN ACTIVE POWER FILTER AT OPERATION ON THE UNBALANCED AND NONLINEAR LOADS WITH CONTROL BY OPTIMIZATION ALGORITHM
Purpose is to develop a method for controlling a power active filter based on search optimization using software of Mathlab package and applying this method for balancing and compensating for all components of reactive p...
HEAT TESTS OF POWER CABLES WITH XLPE INSULATION AT DIRECT VOLTAGES UP TO 110 KV
In this paper, experiment for determining the temperature difference between the elements of cable and in the open air is considered. The formation of a three cables laid in a plane with different spacing between adjacen...
STATISTICAL PROCEDURES FOR TWO-SIDED LIMIT OF A CONTROLLED PARAMETER IN THE PROCESS OF PRODUCTION OF CABLE AND WIRE PRODUCTS
Purpose. To consider issues of statistical control in the process of mass production of cable and wire products on the example of enameled wire. To analyze the results of direct control of the diameter of the wire in two...