Experimental composite material modified with calcium fluoride – three-point bending flexural test
Journal Title: Journal of Achievements in Materials and Manufacturing Engineering - Year 2016, Vol 74, Issue 2
Abstract
Purpose: Evaluation of mechanical properties of fluoride-based experimental compositematerial.Design/methodology/approach: Flexural strength of experimental light-curing compositematerial (ECM) modified with the addition of calcium fluoride was tested. The compositematerial was modified with 0.5–5.0 wt% anhydrous calcium fluoride. Mechanical propertieswere tested after 24-hour storage of specimens in dry or wet conditions.Findings: Flexural strength of ECM modified with 1.5 wt% up to 5.0 wt% CaF2, stored dry,was statistically higher than in wet conditions.Research limitations/implications: The best mechanical properties of flowableexperimental composite material modified with CaF2 were obtained when 1.0 wt% CaF2was added to the composite. Fluoride-based composite materials need further studies toconfirm present findings. Also, fluoride ion release and microbiological properties of CaF2-modified composite materials should be evaluated.Originality/value: Fluoride-based composite materials are promising research field andwould be found desirable dental restorative materials.
Authors and Affiliations
B. Łapińska, A. Podlewska, J. Kleczewska, M. Łukomska-Szymańska
Keywords
Related Articles
- EP ID EP189325
- DOI -
- Views 147
- Downloads 0
Editorial information
Editorial information
Study on homogeneity and repeatability of single-piece flow carburizing system
Purpose: The purpose of this paper was to determine the homogeneity and replicability of carburized layers obtained by a continuous single-piece flow method. Design/methodology/approach: A series of 100 gears was carburi...
Laser alloying of 316L steel with boron and nickel
Purpose: The aim of the study was to improve the hardness and tribological properties of austenitic 316L steel by laser alloying with boron and nickel. Design/methodology/approach: The relatively low wear resistance of a...
Assessment of the compressive strength of the metal-ceramic connections in fixed dental restorations
Purpose: The purpose of the work was to evaluate the compressive strength of metalceramicconnections in the fixed dental restorations.Design/methodology/approach: Restorations were made on a model of the naturalpatient's...
Tribological study of low friction DLC:Ti and MoS2 thin films
Purpose: The purpose of this article is to characterize and compare the microstructure and tribological properties of low friction DLC:Ti and MoS2 thin films deposited on the austenitic steel X6CrNiMoTi17-12-2 substrate....