Experimental determination of the wetting contact angle in nanomodified ceramic glaze
Journal Title: Вісник Одеської державної академії будівництва та архітектури - Year 2018, Vol 1, Issue 70
Abstract
The article deals with the classification of nanomaterials and the possibilities of their use in manufacture of construction ceramics and ceramic glaze. The research is aimed at determining possible ways of applying nanomaterials in the manufacturing of composite construction materials and study of their technological properties. The tests conducted for determining these qualities of nanomaterials application to construction ceramics basically succumb to comparative evaluation of the levels of moisturizing of the glaze’s surface by measuring the angle of the droplets curve, which exponentially grows as the moisturizing ability of the surface drops. The practical aim of these experiments is determination of whether the addition of nanoparticles to such construction materials as ceramic glaze contributes to achieving better produce as a result, as well as at development of such produce. Experimental ceramic glaze, as theorized, is thought of as less susceptible to pollution, and the main goal of the experiment is the achievement (through nanomodification) of such type of glaze which would require less effort and resources in sanitizing and general cleaning, hence would be more economical and practical compared to usual sanitation equipment used in construction. It has been determined that the maximum wetting angle (36.3º) has samples with a 9% slurry content of 2 g per 100 g of modified glaze, which is 1.9 times more than the reference glaze.
Authors and Affiliations
Y. I. , Shylovych, E. M. , Panov
Keywords
Related Articles
- EP ID EP509802
- DOI -
- Views 117
- Downloads 0
Microcracking and coefficient of tension intensity of expanded clay lightweight concrete on multicomponent binding
The results of experimental research of microcracking and coefficient of tension intensity of experimental patterns from expanded clay lightweight concrete on multi-component binding and quartz sand are given. Optimal co...
Analysis of the state of surface water sources in the Dnipro and Dniester river basins and the ways of solving the problem of providing the population with good water
The modern water-ecological situation in Ukraine is characterized. The classification of surface water by the quality of water is given. The analysis of the state of Ukraine's water sources in the Dnipro and Dniester riv...
Research of lightweight monolithic reinforced concrete slabs with the use of plastic inserts
The paper presents technology for installation of floor slabs lightened with plastic inserts which are preliminary stressed under construction conditions. Efficiency of such constructive solution is determined by the act...
Methodology of numerical modeling by boundary element method (BEM) of development of soil border condition zones of the ring foundation
Since reliability of foundations depends on the ability to assess engineering and geological conditions of bases, their hydrogeological situation, change in these properties during construction and operation, there is a...
The generalised dynamical problem of thermoelasticity for the hollow sphere
The generalized dynamical problem of thermoelasticity for the hollow sphere has been considered. It is supposed that the propagation of the temperature is symmetric with respect to the center of the sphere. The temperatu...