Experimental Evaluation of the Effect of Silica Fume on Compressive, Tensile Strength, Abrasion Resistance, Slump and Impact Test and Water Permeability Coefficient of Concrete Effects of Concrete

Journal Title: JOURNAL OF APPLIED ENGINEERING SCIENCES - Year 2018, Vol 8, Issue 1

Abstract

The use of various additives (admixtures) in concrete and cement products has been considered by various researchers in recent years. Microsilica (Silica fume) can also be considered as one of the most widely used additives (admixtures) in this section. In this study, 120 concrete specimens were constructed using a mix design based on ACI in the laboratory with an overview of records and advantages of using microsilica in concrete. The microsilica used in concrete specimens has been considered 2%, 5.5% and 7.5% by weight of cement. Finally impact permeability, tension and uniaxial compressive strength tests were done on concrete specimens and their mechanical properties were evaluated. The results show that microsilica improves the mechanical properties of concrete. The results also show that the use of microsilica in ordinary concrete has a very positive effect in controlling the surface cracks and increasing some strength parameters such as tensile and compressive strength of concrete.

Authors and Affiliations

M. Esmailpour, Kamal Rahmani, S. Piroti

Keywords

Related Articles

Evaluation of Pile's Buckling Under Axial Load by B-Spline Method and Comparison with Finite Element Method and Exact Solution

Although various analytical and numerical methods have been proposed by researchers to solve equations, but use of numerical tools with low volume calculations and high accuracy instead of other numerical methods with hi...

A Review of Fiber Synergy in Hybrid Fiber Reinforced Concrete

Fibre reinforced concrete (FRC) presently utilized as a part of special structures subjected to dynamic loads for example airport pavements, expressways overlays, bridge decks and machine foundations. In most cases, FRC...

Experimental Evaluation of the Effect of Silica Fume on Compressive, Tensile Strength, Abrasion Resistance, Slump and Impact Test and Water Permeability Coefficient of Concrete Effects of Concrete

The use of various additives (admixtures) in concrete and cement products has been considered by various researchers in recent years. Microsilica (Silica fume) can also be considered as one of the most widely used additi...

INVESTIGATING THE EFFECT OF AERATION ON THE FLOW CHARACTERISTICS AROUND UNDER PRESSURE TUNNEL AERATOR USING OPENFOAM OPEN SOURCE SOFTWARE

The flow around the ramp embedded in a pressurized tunnel is divided into the various zones immediately downstream of the ramp, including the cavity and the main zone of flow above the shear layer. The aeration coefficie...

ANALYSIS AND MODELING OF ENERGY DEMAND SYSTEM IN IRAN'S BUILDINGS AND THE INDUSTRY

In this study, the demand of the Iran's energy carriers is analyzed and modeled for the country's largest consumer, buildings and related industries, in the status quo and future perspective. To this objective, the build...

Download PDF file
  • EP ID EP449533
  • DOI 10.2478/jaes-2018-0004
  • Views 70
  • Downloads 0

How To Cite

M. Esmailpour, Kamal Rahmani, S. Piroti (2018). Experimental Evaluation of the Effect of Silica Fume on Compressive, Tensile Strength, Abrasion Resistance, Slump and Impact Test and Water Permeability Coefficient of Concrete Effects of Concrete. JOURNAL OF APPLIED ENGINEERING SCIENCES, 8(1), 27-36. https://europub.co.uk/articles/-A-449533