Experimental investigation of coating in a diesel engine for improved exhaust emissions and performance
Journal Title: International Journal of Automotive Engineering and Technologies - Year 2016, Vol 5, Issue 1
Abstract
In this study, adiabatic property was brought to a 4-cylinder natural aspirated, direct injection diesel engine. For this purpose, cylinder liner, piston upper surface and valves were coated with powder with boron. Solid-boronizing method and plasma spray method were used as coating method. While cylinder liner and valves were coated with the layer of Fe2B in the thickness of 150 micron by using solid boronizing method, piston upper surface was coated with the layer of CoNiCrAlYttra +NiCrBSi in the thickness of 300 micron by using plasma spray method. After the coating process, the engine was subject to performance and emission tests. ASTM-D-2 fuel was used as test fuel. As a result of tests, while BSFC value of coated engine decreased at the rate of 7.5% and BSEC value decreased at the rate of 7% and at the rate of 15% in EGT value. While a decrease was observed at the rate of 10% in CO value, 47% in HC value, and 14% in Smoke value, an increase was observed at the rate of 35% in NOx value.
Authors and Affiliations
Hanbey Hazar*| Department of Automotive Engineering, Technology Faculty, Firat University, Elazig 23119, Turkey, Uğur Öztürk| Department of Automotive Engineering, Technology Faculty, Firat University, Elazig 23119, Turkey
Keywords
Related Articles
- EP ID EP4039
- DOI -
- Views 479
- Downloads 24
Drag Coefficient Determination of a Bus Model Using Reynolds Number Independence
Full-scale wind tunnel tests require too much time and cost to determine drag coefficients of vehicles. In this study, drag coefficient of a blunt bus model was tried to be determined using Reynolds number independence....
The fuzzy logic modeling of diesel engine emissions using fuel mixed with different ratios of hydrogen
In this study a Rule Based Mamdani-Type Fuzzy Modelling (RBMTF) was used to model and determine exhaust gas emissions of CO, CO2 and NOx of a single cylinder, four strokes, air cooled engine where a certain amount of hyd...
Electrostatic discharge risks in electronics used in automotive application
The automotive industry pays special attention to knowledge-based specification, design, manufacturing and qualification of components and other integrated circuits (ICs). As a result, there is the demand for ICs to be f...
Evolutıon of Traffıc Noise Impacts in Amman, Jordan
Amman, the capital of Jordan has been subjected to persistent increase in road traffic due to overall increase in prosperity, fast development and expansion of economy, travel and tourism leading to the traffic noise bei...
Crash Analysis and Evaluation of the Security Road Blocker (SRB) Using Finite Element Method
In this study, the crashworthiness of a medium heavy vehicle onto a designed security road blocker (SRB) as a vehicle barrier is studied numerically and compared with full-scale on-site crash test results in the literatu...