Experimental Investigation of Free Convection from Foam Heat Sinks in an Inclined Rectangular Channel
Journal Title: Cumhuriyet Science journal - Year 2018, Vol 39, Issue 3
Abstract
In this present study, free convection from an in-line 5x1 array of aluminum foam heat sinks which were placed on the bottom wall of the inclined rectangular channel was investigated. Aluminum foam heat sinks were made of Al-6101 alloy. All heat sinks mounted on a bottom wall of the channel was discrete form and exposed to uniform heat flux. Aluminum foam materials with three different pore densities (10, 20 and 40 PPI) were used in experiments. Air was used as coolant fluid (Pr =0.7). The experiments were made for Rayleigh Number range from 2.03 x107 to 1.33 x108 and the channel inclination angles were varied from 0° to 90°. Moreover, the heat transfer results from the aluminum foam heat sinks were also compared to the results obtained for foam-free (without foam) surfaces. The results showed that both the channel inclination angle and the usage of foam heat sinks are significant influences on heat transfer results.
Authors and Affiliations
Ayla DOĞAN, Oğuzhan ÖZBALCI
Effect of Organic Reinforcement Usage on Mica/Polyester Composite Material
The problem of environmental pollution has sprung to the fore with today’s over-population and packaged product sales have risen due to the changing consumption behaviors pursuant to today’s rising living standards, whic...
Iron Interstitial Defects Stability: Under the Uniaxial Stress Effect
Understanding of defect kinetics under stress fields is important for multiscale modeling of nuclear materials degradation. By means of molecular dynamics (MD) simulation, the formation and migration energies were evalua...
Partition of the Spectra for the Generalized Difference Operator B(r,s) on the Sequence Space cs
The goal of this study gives the approximate point spectrum, the defect spectrum and the compression spectrum of generalized difference operator B (r, s) over the class of convergent series.
Treatment of Oily Wastewater by Electrocoagulation Process and Optimization of the Experimental Conditions Using Taguchi Method
In this study, electrocoagulation process was used for chemical oxygen demand (COD), total organic carbon (TOC) and turbidity removal from oily wastewaters and Taguchi experimental method was used to determine optimum op...
Growth Temperature Dependency of High Al Content AlGaN Epilayers on AlN/Al2O3 Templates
In this work, MOVPE (Metalorganic Vapor Phase Epitaxy) growth and characterization studies of high Al content AlGaN epilayers are reported. We utilize high resolution X-ray diffraction (HRXRD) and atomic force microscope...