Experimental Investigation of the Relationship Between the Yarn Tension and Bobbin Diameter in the Warping Process
Journal Title: Fibres and Textiles in Eastern Europe - Year 2019, Vol 27, Issue 1
Abstract
Yarns of different types are unwound from bobbins in different processes like warping, weaving, doubling and re-winding. A change in yarn tension from a full to empty bobbin causes serious product quality and machine efficiency problems in processes like weaving and winding. This paper investigates experimentally the relationship between yarn tension and bobbin diameter in the warping process. For this purpose, an experimental set up was built with a laser sensor measuring the bobbin diameter, a tension sensor for measuring yarn tension, a bobbin winding unit, PC, and DAQ card. A software program was developed in the C programming language to read and record the tension and bobbin diameter simultaneously. The unwinding speed and yarn number both had a significant effect on the relationship between the yarn tension and bobbin diameter. The effect of the unwinding speed became more pronounced with yarns getting thicker.<br/><br/>
Authors and Affiliations
Ozge Celik, Recep Eren
Keywords
Related Articles
- EP ID EP413804
- DOI 10.5604/01.3001.0012.7504
- Views 85
- Downloads 0
Different Approaches in Bathrobe Manufacturing: New Concept Pestemal Bathrobes, an Irreplaceable Element of Hammam Culture
aaa<br/><br/>
Subjective Interpretation and Objective Evaluation of Blackout Fabric’s Barrier Properties
This work presents an experimental approach and the results of preliminary measurements of the light barrier properties of shading fabrics (blackouts). Based on literature it can be stated that there is a lack of require...
Analysis of Thermal-Insulating Parameters in Two- and Three-Layer Textiles with Semi-Permeable Membranes
The main goal of paper presented was to evaluate clothing products (including products coated by semi-permeable membranes) in respect of thermal comfort. To achieve this, the thermal-insulating parameters were measured u...
Hybride Composite Armour Systems with Advanced Ceramics and Ultra-High Molecular Weight Polyethylene (UHMWPE) Fibres
The aim of the research was to develop a new concept of hybride composite armour systems consisting of a ceramic and fibrous composite. Depending on the requirements for ballistic protection, armour systems may be design...
Possibilities for the Estimation of Electrospun Nanofibre Diameter Distribution by Normal (Gaussian) Distribution
Fiber diameter and its distribution are one of the most important parameters related with the quality of electrospun web. The diameter of electrospun nanofibres is not uniform and the histograms of values are usually dis...