Experimental Investigation of TIG Welding for Stainless Steel using Design of Experiment
Journal Title: GRD Journal for Engineering - Year 2017, Vol 2, Issue 6
Abstract
Gas tungsten arc welding is a fusion welding process having broad application in industry. In this experiment selected three process parameters like current, groove angle and welding speed and range was decide for each parameters by trial and error method and distortion was the output parameters. To perform the experiment on TIG welding L27 orthogonal array has been used and based on that according to each run set experiment has performed and optimization run set was found. by Taguchi analysis and also find the regression equation for same experiment.
Authors and Affiliations
R. B. Mandavia
Keywords
Related Articles
- EP ID EP224437
- DOI -
- Views 75
- Downloads 0
Analysis of Hydrologic Parameters using SWAT Model: A Case Study of Subbasin of Vishwamtri Watershed, Gujarat, India
Extraction of watershed parameters using Remote Sensing and Geographical Information System (GIS) and use of mathematical models is the current trend for hydrologic evaluation of watersheds. The Soil and Water Assessment...
Fuzzy Logic in Electrical Systems
With the advent of modern computer technology, the field of Artificial Intelligence is showing a definite utility in all spectrum of life. In the field of control, there is always a need for optimality with improved cont...
Effect on Energy use due to Different Orientation: A Case Study of Commercial Building
Building requires energy in their life cycle from its construction work to demolition work. Studies on the total energy use during the life cycle of buildings are desirable to recognize phases of largest energy use and t...
Solar Power Optimizer for DC Distribution System
Solar Power Optimizer(SPO) for DC Distribution System comprises of a high step-up solar power optimizer (SPO) which efficiently harvests maximum energy from a photovoltaic (PV) panel, energy is output to a dc-micro grid....
GFRP Bars as a Substitution in Structure
Fiber Reinforced Polymer (FRP) is an advanced composite material that has been identified as a potential new construction material. Since it is a non-corrosive material it may be used as reinforcement in concrete member....