Experimental research and laboratory tests for seismic qualification of an “Automatica - PL2023” junction box
Journal Title: Construcţii - Year 2017, Vol 17, Issue 1
Abstract
The paper deals with some aspects regarding "Experimental Research and Laboratory Testing for Seismic Qualification DBE B, Seismic Edge HCLPF = 0.4g, Automatica 1 (2) - 52900 - PL2023 Junction Box". Seismic qualification was performed by physical experiment on the 150 kN Shaking Table at INCD URBAN INCERC IASI. The provisions of the - Technical Specification. Safety Systems Equipment Cabinets. Cernavodă 2. 82–68000–TS - 003, Revision 0, November 2001, - Addendum to Technical Specification 82–68000–TS–003, Rev. 0, Safety Systems Equipment Cabinets and - SR EN 60068-3-3:1994. Environmental testing. Part 3: Guidance. Seismic test methods for equipments, have been observed. The seismic qualification results and the related conclusions are contained in the paper.
Authors and Affiliations
Florin-Radu HARIGA, Andrei DUŢĂ, Aurelia BRADU
Keywords
Related Articles
- EP ID EP587044
- DOI -
- Views 59
- Downloads 0
Experimental research on the mechanical characteristics of a hardwood element
The paper presents the experimental results obtained for bending strength parallel to the fibers of a beam element made of hardwood (deciduous) glued laminated timber. At the same time, tests were carried out to determin...
Indoor air quality in a chemistry laboratory environment
The indoor built environment is the result of the interaction between the site, climate, building type (original design and later modifications of it), construction techniques, sources of chemical, physical and biologica...
Ecological earth-based mortars reinforced with wool fibers
The earthen houses building heritage must be preserved and rehabilitated in order to cope with current use without endangering the security of the inhabitants and to ensure living conditions at the level of new housing s...
Adobe-bricks surface treatment methods for improved water resistance
The main problem with clay-based surfaces is the reduced resistance to water action. Literature does not indicate scientifically validated solutions for surface treatment. However, there are reports that indicate the ben...
The project “RISKSOLVE – Evaluation and investigation of seismic risk reduction solutions for buildings, before and after earthquakes” – a starting point in the scientific cooperation of NIRD URBAN-INCERC, Romania, with IEM Harbin, P.R. of China
The paper presents the framework and outcomes of a Joint Research Project between NIRD URBAN-INCERC, Bucharest, Romania and IEM Harbin, P. R. of China with the topic “Evaluation and Investigation of Seismic Risk Reductio...