Experimental research concerning the bending of AZ31 Magnesium alloy sheets
Journal Title: Proceedings in Manufacturing Systems - Year 2017, Vol 12, Issue 3
Abstract
The tests were done using different values of blankholder forces. The values of the blankholder forces (BHF) were taken between 0 kN and 10 kN. Two forming speeds and two to five specimens were used during the tests. The obtained results were an arithmetic average of each test done on the same conditions. The following parameters of the springback effect were determined during the tests: q1 – angle between the bottom of the piece and the side wall; q2 – angle between the flange and the side wall; r – the radius of curvature of the piece wall.
Authors and Affiliations
Andrei Dragos Bors, Gheorghe Brabie, Bogdan Chirita
Keywords
Related Articles
- EP ID EP249199
- DOI -
- Views 138
- Downloads 0
NUMERICAL STUDY ON DYNAMIC BEHAVIOR OF BORING BAR OF UNEQUAL BENDING STIFFNESS
The effects of tool tip orientation with respect to principal axis of non circular boring bar, on the stability of self-excited regenerative chatter vibration are numerically and experimentally investigated. The principa...
ASPECTS REGARDING THE MODELLING OF THE CHIP GEOMETY IN END MILLING
Due to the fact that the milling process still remaining a challenge for researchers, the paper deals with the concept of chip geometry model built on the basis of geometric definition of the cutting tool, namely the i...
Calculus algorithm for evaluation of gravitational and inertial loads acting on a SCARA industrial robot in pick and place applications
In this paper a calculus methodology for optimal structure design of numerically controled (NC) axes of SCARA industrial robot (IR) is presented. Besides identification of optimal structure, also a performance check is p...
Business partners evaluation & selection at the SMES – a Romanian case study
At the SMEs level, the partner evaluation and selection is an activity aimed to build a business partnership that will lead both to increased competitiveness and adaptability to market demands. In recent years, the Roman...
Hybrid palletizing system with gantry robots for orienting the objects and articulated robot for overall layer handling
The paper presents works performed by the authors in the field of developing new concepts and virtual prototyping new model of hybrid palletizing system. Along development of the palletizing system virtual prototype in o...