Experimental Research for Measuring Friction Forces from Piston Sealing at the Hydraulic Cylinders
Journal Title: Tribology in Industry - Year 2014, Vol 36, Issue 4
Abstract
The article presents some aspects of developing, within INOE 2000-IHP, of an experimental research on the determination of frictional forces that occur in the mobile sealings of the pistons, between the piston sealings and the inner liner of hydraulic cylinders. In the first part of the paper, are presented some specific elements of the experimental device and of the testing stand which have been developed, while in the second part are presented some graphical results obtained in experimental research, as well as some comments on them. This developed experimental research marks the continuing of a major action on the tribological behavior of mobile hydraulic seals, which are frequently used in the construction of hydraulic cylinders.
Authors and Affiliations
C. Cristescu , C. Dumitrescu , R. Radoi , L. Dumitrescu
Keywords
Related Articles
- EP ID EP100153
- DOI -
- Views 75
- Downloads 0
Experimental Study of Adhesive Wear of a Holding Device Using a Cross Cylinders Tester
Adhesive wear was identified in a cylinder of a rotating holding device of a forming die system, which permits to hold and align a leaf spring to carry out a punching operation at the automotive industry. To investigate...
Tribocorrosion Behavior of Amorphous Carbon-Silicon Coated Titanium in Biological Medium
Studies of materials in biomedical applications have focused on the generation of new biomaterials and the development of surface modifications, mainly of metals. Amorphous silicon containing diamond like carbon DLC-Si c...
Development of Entada Mannii Fiber Polypropylene Matrix Composites for Light Weight Applications
This study investigates the use of Entada mannii fiber as potential reinforcement of thermoplastic composites suitable for light weight applications. Composites of 5 wt.%, 10 wt.% and 15 wt.% were produced by compression...
Surface Roughness Analysis in High Speed Turning of Ti-6Al-4V Using Coated Carbide Inserts: Experimental and Modeling Studies
Machining and achieving good surface finish in Ti-6Al-4V is a challenging task. Several factors influence surface finish of which some can be controlled and are mainly the machining parameters and some are considered unc...
Effect of Ageing on Dry Sliding Wear Behaviour of Al-MMC for Disc Brake
The present investigation shows the wear behaviour of as-cast and heat treated, A356 aluminium alloy reinforced with SiC and Graphite particles subjected to different ageing durations. The liquid metallurgy technique was...