Experimental research of deformation zone of adaptive clamping elements for lathe jaws chucks
Journal Title: Вісник Тернопільського національного технічного університету - Year 2016, Vol 82, Issue 2
Abstract
The paper deals with the experimental research of clamping surface deformation zone of adaptive clamping jaw to equip lathe jaws chucks during machining work pieces of different diameters. The directly proportional displacement dependence on clamping force for the most deformed part of clamping zone ring segments in work pieces of different diameters machining is obtained. The results of experimental research have verified the theoretical calculations and showed that clamping part of adaptive jaw is being deformed sufficiently for full fitting of the clamping jaw surface and the work piece.
Authors and Affiliations
Ihor Lutsiv, Vitalij Voloshyn, Roman Bytsa
Keywords
Related Articles
- EP ID EP257927
- DOI -
- Views 59
- Downloads 0
Investigation of the power-consuming mower drive operation
The problems of raising operating efficiency of segment–pin mower are analysed. Difficulties, which occur during the operation of such mower drives, have been analysed. The ways to get rid of these problems have been ana...
Theoretical and experimental study of double-sided grinding process of round face ends by orientated wheels with calibrating sections
The developed 3D model first determines the overall machining efficiency Qs of two round face ends processing, for example, cross-pieces, pushers, depending on the coordinate θb along the entire length of the contact lin...
Modelling of mechanical behaviour of shape memory alloys using finite elements method
Superelastic behaviour of Ni-Ti alloy wire under variable amplitude loading was simulated and experimentally studied. Mechanical properties and phase transformation stresses (𝜎𝑀𝑠, 𝜎𝑀𝑓, 𝜎𝐴𝑠, 𝜎𝐴𝑓) of the material were obta...
Research of metal of the dies for punching and cutting deposited by tungstenfree high speed steel type (fcadw-ss 100h4m5f2 (zr)
An economic technological mode of dies production according to the scheme: mold surfacing - annealing - mechanical processing - quenching – tempering. The results of research of applying of self-shielding flux-cored wire...
Synthesis of digital radio receiver system for secure communication with frequency-hopping spread spectrum
It was represented the results of synthesis and modeling of work of digital receiver based on the digital down converter (DDC), and a digital signal processor (DSP), which are used to process received signals. The method...