Experimental Research on Heating Behavior of Some Steels During Hot Metallurgical Processing
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2014, Vol 37, Issue 1
Abstract
The heating of steel semi-products in view of hot rolling process or heat treatments is achieved at the large scale in propulsion ovens for the increase of their deformability and to improving mechanical characteristics of finite products. The main heating defects (oxidation and decarburation, overgrown grain size of steels) represent processes of alteration of the superficial layers or the decrease of the physical and mechanical characteristics of the finished products. This paper presents the results of experimental researches on the oxidation susceptibility, variation of the depth of the decarburized layer and the susceptibility to overheat of two ship steel grades (A36 and E36 grade), during the heating for the hot metallurgical processing of the semi-products. It is the deepening of the researches about heating behavior of naval steels with different chemical compositions.
Authors and Affiliations
Elisabeta VASILESCU
Keywords
Related Articles
- EP ID EP590586
- DOI -
- Views 77
- Downloads 0
On the Prediction of the Strip Shape in a Cold Rolling Mill (1700 mm)
In this paper is shown a new way for predicting the precision of laminated strip in a cold rolling mill (1700 mm). The increasing demands on the quality of rolled strip; need new technology for monitoring the strip shape...
Effect of ZrO2 Nanoparticles on the Mechanical and Anticorrosion Properties of Epoxy Coating
Homogeneous epoxy coatings containing ZrO2 nanoparticles were applied on Grade A naval steel substrates. The morphology of the coating was characterized by optical microscopy and scanning electron microscopy. The effect...
Improving the Powerful Behavior of an Experimental Model of Savonius Turbine (S-Rotor) with Coupled Aerodynamic Additional Blades
The proposed experimental model brings an improvement in the start of turbine rotation and torque uniformity in load. Constructively, the original blades of the turbine have gap and overlay. Additional blades are placed...
New Materials and Practices for Brickwork Tip "TORPEDO" Pot
Nowadays, pots, besides transport operations and liquid metal desulphurization perform functions of dephosphorization. Intense refractory brickwork is required, and in such cases, it is recommended that the performance r...
Structural Characteristics in Cobalt Based Alloys
In the present paper there are presented results of investigations on samples of partially removable denture made of cobalt base alloys (Co-Cr-Mo) regarding specific structural analysis: determination of structural phase...