Experimental research on the effect of liquid active filler on the properties of locally manufactured explosives
Journal Title: Вісник Житомирського державного технологічного університету. Серія: Технічні науки - Year 2018, Vol 81, Issue 1
Abstract
Different explosives with correspondent charges constructions are used to increase the effectiveness of the explosion in the process of crushing rock masses. Therefore, the development of simple locally manufactured explosives with the different additives and formation of charges in polyethylene sleeves is topical. As a result of the experiments, it was established that the injection of a liquid sealing component in the well charge affects the properties of explosives and gives the ability to adjust a volume concentration of explosive energy. The dependency of the mixed explosive density on the content and quantity of the liquid sealing component is established that provides water resistance of the explosives. The charge with a liquid sealing component addition has a much greater capacity for work when explosion than the charge with the same explosive without additions. However, the explosives do not show the greatest efficiency when the intergranular space is completely filled.
Authors and Affiliations
A. A. Frolov, A. V. Kuliapina
Keywords
Related Articles
- EP ID EP311691
- DOI -
- Views 115
- Downloads 0
Research of the stress condition of cast billets blade chisel
Models of a drill bit and a mold were developed. Melted steel pouring process was studied. Residual stresses distributions for different sections of a blade bit were studied. The highest residual stresses were observed i...
The device for the testing of the fragile rock samples within triaxial stress
The rocks at the depth are in volumetric stress (undergo an action, as a rule, a comprehensive compression). Comprehensive compression at the point of the array is characterized by a tensor of stresses acting on three mu...
Connection between surface microrelief of friction pairs and intensity of their attrition in non-stationary exploitation conditions
Comparing with the previous publications related to surface microrelief of friction pairs, this article focuses on investigation of workpiece surface interaction having different or similar, fully or partially regular sl...
Influence of Nonlinear Environmental Properties on the Process of Pulse-Stimulated Compulsory Combined Scattering under Femtosecond Pumping Conditions
Impulsive stimulated Raman scattering (ISRS) observed by pump-probe experiments was considered. The response from the model system for ISRS-process is calculated for femtosecond laser pump pulse. The response of the mode...
Investigation of the effect of excess air on the process of baking carbon products in an «under fire» chamber
Qualitative management of the process of baking carbon products by changing the parameters of the technological routine allows achieving a lower output of defective products. The study of the main stages of the baking pr...