Experimental Study of Melting and Solidification of Paraffin Wax with dispersion of Al2O3 in Rectangular Enclosure

Journal Title: GRD Journal for Engineering - Year 2017, Vol 3, Issue 1

Abstract

In this experimental based research work, the performance of Thermal Energy Storage System (TESS) during charging (melting) and discharging (solidification) processes were studied under varying conditions. The results from the CFD simulations for these conditions were published earlier. Here, the experimental results had been discussed. Paraffin wax concentration was varied to form the TESS. Al2O3 was included as nano-material with a varying concentration – 0% (Base Model), 1% (Variant-1), 2% (Variant-2) and 3% (Variant-3). It was observed that the Variant-1 had provided better performance for Configuration A under the heat load of 125 W and 175 W in the melting process. During the solidification process for the Configuration B, Base Model had better performance than the variants with nano-fluids. Results from CFD simulations as well as experimental procedure were in good agreement for this research work.

Authors and Affiliations

R. R. Jadhav, S. Y. Bhosale, A. V. Waghmare, H. N. Deshpande

Keywords

Related Articles

Assessment of Heat and Fluid Flow Enhancement over Heated Perforated Ribs: Review

This paper presents a review on heat and fluid flow enhancement in an adiabatic channel over heated perforated ribs using pulsating flow methodology. A pulsating flow is imposed by an acoustic woofer at the channel inlet...

Segmentation Of Coronary Artery Blood Vessels Using Morphological Operators

Extraction of coronary artery from coronary angiography is an important goal to improve the diagnosis and treatment of coronary artery disease. This paper presents the extraction of coronary artery blood vessels using Mo...

Simulation of Photovoltaic Burp Charge System on Energy Saving by Smart Charge Management

To accomplish beat charge utilizing direct photovoltaic (PV) vitality, it is important to keep the vitality supply from PV module constant and ideal, particularly to keep vitality supply from hindering amid the beat brea...

Characterization of Leachate from Municipal Solid Waste (MSW) Landfilling Sites of Kuberpur, Agra

The present paper describes the characteristics of leachate generated from municipal solid waste landfilling sites of Kuberpur, Agra. The main objective of this study was to collected and analysed for various physic-chem...

Study the Effect of Single Segmental Baffle cut on Overall Heat Transfer Coefficient in Shell and Tube Heat Exchanger

To figure out the best baffle cut to obtain the maximum overall heat transfer coefficient for the better performance of shell and tube heat exchanger. Methods: To identify the best relation between the baffle cut and ove...

Download PDF file
  • EP ID EP291467
  • DOI -
  • Views 79
  • Downloads 0

How To Cite

R. R. Jadhav, S. Y. Bhosale, A. V. Waghmare, H. N. Deshpande (2017). Experimental Study of Melting and Solidification of Paraffin Wax with dispersion of Al2O3 in Rectangular Enclosure. GRD Journal for Engineering, 3(1), 6-14. https://europub.co.uk/articles/-A-291467