Experimental study of pseudoelastic NiTi alloy under cyclic loading
Journal Title: Вісник Тернопільського національного технічного університету - Year 2018, Vol 92, Issue 4
Abstract
The phase transformation temperatures of pseudoelastic NiTi alloy were defined by differential scanning calorimetry. The effect of the stress range on the functional properties of the NiTi alloy under uniaxial tension in ice water at a temperature of 0 0С was studied. The cylindrical specimens with 4 mm in diameter and a gage length of 12.5 mm were tested under static and cyclic loading with frequency of 0.5 Hz. All cyclic tests were performed under the crosshead displacement controlled condition on the STM100 machine. At the temperature above Af the effect of the cyclic loading on the maximum stress in general could be characterized by several stages: strengthening, softening, stabilization and rapid decrease of the maximum stress, which is caused by the initiation and macrocrack growth. With the increase of the maximal stress in the first cycle from 509 MPa to 605 MPa, the strain range also increases.
Authors and Affiliations
Volodymyr Iasnii, Petro Yasniy, Yuri Lapusta, Tetyana Shnitsar
Keywords
Related Articles
- EP ID EP521664
- DOI 10.33108/visnyk_tntu2018.04.007
- Views 49
- Downloads 0
Resonance radial oscillations of a piezoceramic cylinders and spheres taking into account electromechanical losses
Hollow piezoceramic radially polarized cylinders and spheres widely used as sound transducers and receivers are considered. The most characteristic run mode of piezoceramic transmitters is resonant mode. In this paper, a...
Analysis of natural frequencies and shapes of stringer-stiffened cylindrical shells
The linear analysis of free vibrations of horizontally oriented stringer-stiffened cylindrical shell was analyzed. The study was conducted using finite element method. The authors investigated the effects of: changes in...
Identification of parameters of dipole model of the led radiation source
The results of identification of the parameters of a mathematical model of the radiation source LED are given. For the mathematical modeling abstract physical object is used – dipole and assumptions that diagram radiatio...
Compressive and tensile strength of reinforced сoncrete with basalt fiber
Nowadays the more often usage of concrete under extreme operating conditions requires invariably improvement of its properties such as: crack, frost, shock resistance and resistance before dynamic loads. It can be realis...
Determination of stresses in materials with evaporated coatings
The paper considers the structure of the stress state in thin ion-plasma coatings and the influence of various factors on the efficiency of structures of this type of coatings. A comparative analysis of theoretical and e...