Experimental Study of Thermoelectric Generator as Electrical Source of Impressed Current Cathodic Protection for Ship Hull

Abstract

Impressed Current Cathodic Protection (ICCP) is a method to protect metallic material such as ship hull from corrosion by using electric current. In this research, a prototype of thermoelectric generator is developed in order to supply the ICCP system. This thermoelectric generator is planned to utilize the exhaust gas from main engine of the ship. Method carried in this research is assembling the prototype of thermoelectric generator followed by conducted experiment to observe the potential energy of the prototype. After that, the required number of thermoelectric generator is calculated to supply the ICCP system to protect the ship from corrosion. The object in this research is live fish carrier “Wellboat” which has 396.08 m2 wetted area. The required voltage and current to protect the ship from corrosion for three years are 16.67 Volt and 2.66 Ampere. Based on the experiment, a prototype of thermoelectric generator can generate 0.34 Ampere and 4.43 Volt, causing the need of 8 series and 4 parallels connection. It can be concluded that the corrosion rate on the ship hull can be decelerated by using impressed current cathodic protection method without needing additional cost or fuel consumption to produce electric energy.

Authors and Affiliations

Adi Kurniawan, Sutopo Purwono Fitri

Keywords

Related Articles

Information Connectivity as A Primary Instrument to Enhance Transport Connectivity

Remotely located islands posses their own unique beauties and their common challenges. A case study on Maratua to enhance the quality of life is perceived to be achieved through the enhancement of the transport connectiv...

Flooding Causes Analysis in The Engine Room of KM. Nusantara Akbar

The study analyzes about the cause of the leak in KM Nusantara Akbar’s engine room. However, this research is focus on leakage caused by shaft deflectio From the field data provided by the KNKT, know the cause of the le...

Risk Based Inspection of Gas-Cooling Heat Exchanger

On October 2013, Pertamina Hulu Energi Offshore North West Java (PHE – ONWJ) platform personnel found 93 leaking tubes locations in the finfan coolers/ gas-cooling heat exchanger. After analysis had been performed, the c...

Design and Simulation of Automatic Ballast System on Catamaran Ship Based on Programmable Logic Control

Characteristics of catamaran ship which has deficiency to ship stability during maneuvering. to that end, this paper concerns about ballast system design in support of the safety and comfort of passengers on the catamara...

Technical Analysis Ballast Water Treatment By Using Economizer Utilizing Main Engines Exhaust Heat To Comply With International Ship Ballast Water Management At Mv. Leader Win

Based on the International Ballast Water Management regulations (IBWM), waste water ballast itself has the attention of some researchers to reduce the amount of waste species present in the ballast water with a variety o...

Download PDF file
  • EP ID EP221257
  • DOI 10.12962/j25481479.v1i3.1940
  • Views 213
  • Downloads 0

How To Cite

Adi Kurniawan, Sutopo Purwono Fitri (2017). Experimental Study of Thermoelectric Generator as Electrical Source of Impressed Current Cathodic Protection for Ship Hull. International Journal of Marine Engineering Innovation and Research, 1(3), 143-148. https://europub.co.uk/articles/-A-221257