EXPLOSIVE AEROSOLS SEDIMENTATION PROCESSES WITH MODERN COAL MINING TECHNOLOGIES
Journal Title: Вестник научного центра по безопасности работ в угольной промышленности - Year 2018, Vol 0, Issue 2
Abstract
Experimental studies are considered of air dust levels and the intensity of dust sedimentation at the extraction site openings which are ventilated according to the schemes with directing the outlet stream into the conveyor gallery according to paragraph 135 of the current safety regulations. Method of dust concentration dynamics along the opening length simultaneous studies with measurements of dust deposits mass and sedimentation intensity dynamics along the 50 meter of the roadway, adjacent to the longwall face is applied. In the course of measurements, the arrangement of the plates was varied. Data on the deposited dust mass were obtained: along both walls of the opening; with several plates located in the "one point" of measurement; on change of the total mass of deposited dust at different sections along the conveyor gallery with the outlet air stream. Significant differences are disclosed in the intensity of dust sedimentation at different points of 50-meter long opening sections containing internal sources of dust emission. The aim of the work is to improve the existing methods and to create new ones for on-going control of dust sedimentation with the aim to determine explosive conditions of mine workings and to establish the frequency of work to neutralize the explosive properties of coal dust.
Authors and Affiliations
S. B. Romanchenko, V. N. Kosterenko, A. A. Trubitsyn, S. S. Kubrin
Keywords
Related Articles
- EP ID EP645739
- DOI -
- Views 82
- Downloads 0
MFSS IN A COAL MINE - POSITIONING AND ALERT OF STAFF
In paragraph 41, "Safety rules in coal mines" Order No 1158 from 20.12.2010, the Federal Service for Ecological, Technological and Nuclear Supervision includes the following requirements: the mine must be equipped with c...
ON THE ROLE OF THE TECHNICAL COMMITTEE FOR STANDARDIZATIONTC 269 "MINING" IN THE NORMATIVE REGULATION OF MINING EQUIPMENT SAFETY
In the given article information on standardization role in provision of mining equipment safety regulation is presented. Standardization Technical Committee TC 269 “Mining” role in provision of mining equipment safety i...
DETERMINATION OF THE CONTROL POINTS QUANTITY AND THEIR LOCATION IN THE PROTECTED OBJECT FOR HIGH-SPEED MULTIPOINT ELECTRO-OPTICAL SYSTEM FOR FIRE DETECTION AND DETERMINE ITSSPATIAL COORDINATES
The approach to determining of control points quantity and their arrangement on protected object for high-speed multipoint electro-optical system of fire detection and determine its spatial coordinates (EOS) is described...
PECULIARITY OF COAL SEAM GAS PERMEABILITY INCREASE
The problems of methane extracting from high gas content coal seams are reviewed. Some scienti c and technical peculiarities of coal seam permeability increase in order to improve gas pre- drainage ef ciency are demonstr...
EMPLOYEES PROFESSIONAL DISEASES OCCURRENCE RISK MANAGEMENT PROGRESSIVE MODEL DEVELOPMENT WHEN MINING COAL DEPOSITS BY OPEN CAST METHOD
Working condition state studies in the coal industry are presented. It is noted that high manufacturability and coal enterprises industrial complex rates growth lead to the inevitable occurrence and concentration of harm...