Fatigue Analysis of Pulley by using Finite Element Analysis
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
Conveyor pulleys deflect the belt on a conveyor and in the case of drive and take-up units, pulleys introduced the required motive force and tension into the belt. Mechanical advantage is a measurement of how much a simple machine multiplies a force. The bigger the mechanical advantage, the lesser the force needed, but greater the distance have to use that force. The present analysis has been carried by using finite element analysis. By applying various identification numbers of the pulley and different RPMs, the analysis has been carried out for the same geometry of the material
Authors and Affiliations
N. ANURADHA, SUBRAMANYAM B, K. CHINNA MADDAIAH, K. DEEPAK, V. MAHIDAR REDDY
Keywords
Related Articles
- EP ID EP278687
- DOI 10.24247/ijmperdfeb201811
- Views 117
- Downloads 0
Development and Optimization of Experimental Data based Models for Bamboo Sliver Cutting by using Human Powered Flywheel Motor
This paper presents the development of the experimental data based mathematical models for cutting the slivers from bamboo by means of human powered flywheel motor. There were various dependent and independent variables...
VIBRATION ANALYSIS OF HONEYCOMB SANDWICH PANEL IN SPACECRAFT STRUCTURE
A Spacecraft structure has a cuboid construction and is composed of central cylinder and a number of interconnected honeycomb sandwich panels. A spacecraft structure accommodates all electronic packages and provides adeq...
Controlling & Calibrating Vehicle-Related Issues using RFID Technology
This study explains how to control vehicle’s emission level and also how to keep traffic under control by using Radio Frequency Identification (RFID) technology. The RFID can also provide complete details about the vehic...
Experimental and Numerical Investigation of Lower Limb Prosthetic Foot made from Composite Polymer Blends
In this work, two composite polymer blends, PMMA/SR and PMMA/PUR, reinforced with by carbon fibers (CF) were prepared as a suitable material for lower limb prosthetic foot. The tensile properties were measured experiment...
The Numerical Simulation and Evaluation of Aircraft Engine Axial Flow Turbine using Numerical Techniques
This research aims to improve the efficiency of an axial flow turbine by improving the boundary conditions. In the baseline paper, Sherwood number, Nusselts number for a given flow were determined. The pressure ratio was...