FAULT DETECTION AND CONTROLLING OF SHELL AND TUBE HEAT EXCHANGER USING ANN
Journal Title: JOURNAL OF ADVANCES IN CHEMISTRY - Year 2016, Vol 12, Issue 20
Abstract
Fault Detection and controlling is important in many industries to provide safe operation of a process. Heat Exchangers are generally used in process industries. Shell and Tube Heat Exchanger is a common type of heat exchanger used in oil refineries, chemical processes .It is suited for higher-pressure applications. Actuator faults, sensor faults and process faults are the common faults occurring in chemical processes. To identify and remove these type of faults in the system fault detection and controlling techniques are proposed. In this present work Sensor and Process faults of Shell and Tube Heat Exchanger is detected and controlled using Artificial Neural Network(ANN).NARX network (Nonlinear Auto regressive with External input) is used as ANN network structure. Network is trained using Levenberg Marquardt and Bayesian Regularization algorithms. The performance parameters such as Mean Square Error, Integral Absolute Error (IAE), Integral Time Absolute Error (ITAE) and Integral Square Error (ISE) are obtained for the above said methods which are shown in simulation results. Tabulated results shows the comparison between the three algorithms. Simulation results also shows the comparison between the controlled response obtained from ANN with and without PID Controller.Â
Authors and Affiliations
N. BAGYALAKSHMI, M. THIRUMARIMURUGAN
Keywords
Related Articles
- EP ID EP653001
- DOI 10.24297/jac.v12i20.5322
- Views 224
- Downloads 0
Conservative liquids based on synthetic petroleum acids salts and aliphatic nitro-compounds
Synthetic oil acids (SOA) salts and nitroderivatives of high olefins C14 as oil-soluble corrosion inhibitors for mild steel in various mediums was synthesized. On the bases of turbine oil T-30 was prepared composition of...
RECYCLED POLYETHYLENE BONDED PARTICLE BOARD FROM PULPED AND UNPULPED GMELINA ARBOREA SAW DUST WASTES
Particle boards were prepared from saw dust wastes obtained from Gmelina aborea using polyethylene as binder. The boards were produced under three different compositional variables, namely: particles sizes (1 µm, 1.5 µ...
Electrochemical Behavior of Selenium as Part of Composite Electrode in Sulfuric Acid Medium
The method of productiion of the composite selenium-graphitic electrodes based on organic polymer binder was proposed. Electrochemical behavior of the elementary selenium as content of composite electrode in sulfuric aci...
Determination of Adsorption Isotherm model best fit for methanol leaf extract of Securinega virosa as corrosion inhibitor for corrosion of mild steel in HCl
The adsorption isotherm model best fit of the methanol leaf extract of Securinega virosa as corrosion inhibitor for the corrosion of mild steel in 2 M HCl medium was determined with the assistance of the Adejo-Ekwenchi a...
Synthesis, Characterization and Application of Nano-adsorbent Materials in the Sorption of Pb(II), Ni(II), Co(II), Mn(II), Li(I) from Aqueous Solution
In this study, nano-adsorbent materials were synthesized from two different precursors by thermal activation technique. The first was the synthesizing of nano-zinc silicate from chemical reagents of zinc oxide and commer...