Features of formation of microwave GaAs structures on homo and hetero-transitions for the sub-microconnection of the lsic structures
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 1, Issue 5
Abstract
<p>The features of the formation of microwave GaAs structures are considered and a set of studies is carried out to create a serial technology of large-scale integrated circuit structures (LSIC), including the number of microwaves on GaAs epitaxial layers deposited on monosilicon substrates.</p><p>The conditions for the formation of a two-dimensional electron gas in hetero-structures with the determination of electron mobility depending on the orientation of the surface were investigated. For hetero-structures on the surface of a semi-insulated GaAs substrate rotated from the plane (100) at an angle of 6–10º with oxygen content on the initial surface С<sub>0</sub>=10–50 % relative to the gallium peak of the Auger spectrum, a strong mobility anisotropy was found due to an increase in the angle of reorientation and incomplete annealing of carbon from the initial surface of the GaAs substrate.</p><p>For the deposited layers of gallium arsenide on monosilicon substrates epitaxial technology is used, which can significantly improve the purity of the obtained material, namely, significantly reduce the level of oxygen and carbon isoconcentration impurities, which strongly affect the charge state of the interface.</p><p>For the formation of structural layers on GaAs, the technology for the formation of nitride layers of Si<sub>3</sub>N<sub>4</sub>, AlN, BN by the magnetron method at low substrate temperatures and a given stoichiometry was developed and investigated. The combination of gallium epitaxial nano-silicon arsenide technology to silicon substrates became realistically possible only with the development of technology of magnetron precipitated buffer layers of germanium.</p>The technology of the formation of logical elements NOT, OR-NOT, AND-NOT of high speed with low threshold voltage is developed, which allows to build high-speed chips of combination and sequential types on complementary structures
Authors and Affiliations
Stepan Novosiadlyi, Volodymyr Gryga, Bogdan Dzundza, Sviatoslav Novosiadlyi, Halyna Klym, Omelian Poplavskyi
Keywords
Related Articles
- EP ID EP666183
- DOI 10.15587/1729-4061.2019.157212
- Views 69
- Downloads 0
Development of the plant for low-temperature treatment of meat products using ir-radiation
<p>The daily increasing demand for meat products with original taste properties causes the need to improve processing of meat raw material. This applies not only to the technology of preparation of raw material, for exam...
Influence of the properties of blast furnace slag on cast iron heating at pulverized coal injection
<p>In the course of the studies at two industrial blast furnaces, we established a change in the characteristics of slag mode and cast iron heating, resulting from the transition to the pulverized coal fuel injection wit...
Development of a miniature microwave radiothermograph for monitoring the internal brain temperature
<p>To improve efficiency of non-invasive monitoring of the internal brain temperature, a small-size single-channel microwave radiothermograph consisting of a miniature radiometer and a radiometric sensor based on a print...
Analytical study of starting current of the induction motor stator
<p>In a three-phase coordinate system, the induction motor is described by a system of nonlinear differential equations of the eighth order, which in a general case does not have an analytical solution. The system of IM...
Development of the method to control telecommunication network congestion based on a neural model
<p>The circuit of congestion control using feedback by the sign of function of sensitivity to telecommunications network performance was considered. To determine a given function, the use of a simple neural network model...