Features of the application of the methodology for assessing the acoustic properties of a room using the example of a press center
Journal Title: Інформаційно-керуючі системи на залізничному транспорті - Year 2019, Vol 24, Issue 1
Abstract
The authors described the use of the methodology for assessing the acoustic properties of a room using an example of a room with special acoustic conditions. Substantiation of the sequence of acoustic examination stages was carried out, an acoustic examination algorithm was described for placing the press center in order to obtain optimal acoustic conditions. The authors proposed three options for acoustic finishing of the room, differing in the cost of the materials used. The modeling of the acoustic field in the room was carried out for all three finishes. The article presents the simulation results with the analysis of the obtained objective characteristics of the sound field, taking into account the particular purpose of the room. All three surface treatments in the press center allow us to obtain a uniform trend of the frequency dependence of the reverberation time, which has a positive effect on the perception of speech material, to provide almost perfect speech clarity and intelligibility in all listening spaces. When analyzing the structures of the reverberation process, characteristic areas were identified at each listening position, for which the presence of reflections with a high amplitude and the same period was characteristic. The cause of such reflections are parallel surfaces that do not have a high absorption coefficient. The presence of such multiple reflections due to parallel surfaces leads to a significant deterioration in the acoustic quality of the room. The authors have proposed ways to solve the problem by changing the profile of the front wall of the cabinet, located on one of the parallel surfaces, and displacing the doorway from its original position. The article presents the results and analysis of the structures of the reverberation process at the control points after changing the profile of the front wall of the cabinet and changing the position of the door.
Authors and Affiliations
V. Usik, I. Bielikov
Keywords
Related Articles
- EP ID EP504457
- DOI 10.18664/ikszt.v0i1.158805
- Views 138
- Downloads 0
Research of the possibility of using neural networks in the tests of locomotive hydraulic transmissions
The possibility of developing a self-diagnostics system of the diesel locomotives hydraulic transmissions information-measuring test system is researched. The use of neural networks and fuzzy logic for the development of...
Development of mathematical model of process of flowing around of carriages the current of air
The analysis of work of different subsystems of automatic control of speed of rolling wagons is conducted in automated control system by marshaling yards. New scientific approach is formed about determination of potentia...
The method of access control in the mission-critical computer system on the basis of 4G network
The main feature of the 4G network for quality of services management is the adaptation of the radio channel resources to the specified requirements for the quality of the service provided. The article proposes a method...
Analysis of the features of models of optical transport networks
Features of construction of models of optical transport networks are considered. It is noted that the models have common features: a hierarchical level structure, where each level has an independent set of functions, whi...
Improvement of the method of hierarchical interpolation based on the use of neural networks
Given the convergence of networks, the amount of transmitting information increases in geometric progression, in turn, technical implementation does not allow the use of a wide range of compression methods, as well as th...