Features of the estimation of the intensity of heat exchange in self-ventilated disk-shoe brakes of vehicles
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 1, Issue 5
Abstract
<p>Analysis of the energy load of a cargo vehicle self-ventilated disk-brake system, which significantly affects the operational parameters of its friction pairs is made. Plastic deformation of the disk friction belts can be observed under cyclic loading of the brake friction pairs, and the deformation process is aggravated by the fact that the yield strength of the material drops in their local zones. Due to plastic friction during compression of the disk friction belts heated zones, therefore they bulge, further leading to the formation of microcracks.</p><p>The research is based on the fact that during the vehicle braking moment, the intensity of heat transfer from the outer and inner, matte and polished surfaces of the self-ventilating braking disk by convection is much lower than the intensity of heat dissipation processes in the right and left body of the half-disks under heat conduction. This is explained by the fact that the rate of heating is ten times higher than the rate of forced air cooling.</p>As a result of the research, the regularities of the thermal conductivity change in the half-disk side surface, the inverse of which is the thermal resistance of the half-disk were revealed. The design and heat transfer processes in the self-ventilated disk-shoe brake of the vehicle are considered. The intensity of heat transfer of a vehicle's self-ventilated brake disk is investigated in relation to speed and with account of heat transfer coefficients from external and internal surfaces of the disk. The influence on the intensity of the heat transfer process on the surface areas through the disk thickness is established
Authors and Affiliations
Nikolaj Volchenko, Aleksandr Volchenko, Dmitriy Volchenko, Pavel Poliakov, Volоdymyr Malyk, Vasyl Vytvytskyi, Petr Krasin
Keywords
Related Articles
- EP ID EP666188
- DOI 10.15587/1729-4061.2019.154712
- Views 61
- Downloads 0
Conversion of N-containing compounds of flash steam condensate from carbamide production into hydrazine sulfate
<p>Formation of 1.5 m<sup>3</sup> of wastewater per 1 ton of carbamide in the form of flash steam condensate accompanies carbamide production. It is necessary to purify flash steam condensate from nitrogen compounds by t...
Development of the method for rapid detection of hazardous atmospheric pollution of cities with the help of recurrence measures
The method for rapid detection of hazardous pollution of the atmosphere of cities, which is based on dynamic measures of recurrence (repeatability) of the states of the pollution concentration vector, was developed. The...
Development of a model for the integrated management of the international delivery chains formation
<p>We propose a model for the formation of international logistics chains based on an integrated multicriterial analysis of potential cargo transportation routes and delivery cost. The application of the systemic approac...
Determining the force function distribution in the working zone of a disk magnetic separator
The paper reports a research into the distribution of magnetic force function in the working zone of a newly-designed disk separator, intended to clean the finely-dispersed bulk substances, transported by a belt conveyor...
Studying the effect of concentration factors on the process of chemical metallization of powdered polyvinylchloride
<p>Influence of concentration of components of chemical metallization solutions on the process of copper reduction on activated polyvinylchloride surface has been studied. It has been established that changes in concentr...