FeCrMnNiCSi Coating on Grey Cast Iron FC 25 Variable Gas Pressure on Thermal Arc Spray Method
Journal Title: Jurnal ILMU DASAR - Year 2018, Vol 19, Issue 1
Abstract
One of the important components of motor fuel engine is cylinder liner. There is a compression and friction combustion process with a piston that produces mechanical energy in cylinder liner. This process introduced several problems that often arise, such as wear reducing because the piston is moving back and forth continuously causing gas leakage so that compression pressure is reduced. To prevent such damage it is necessary to coat the metal with other material that has better wear resistance. This study used FeCrMnNiCSi coating material deposited on Gray cast iron FC 25 by thermal arc spray method to analyze the influence of pressure air variation on morphology and mechanical properties. SEM analysis showed that the higher pressure on the coating process results smaller particles thereby decreasing the porosity. Roughness testing also showed a decrease in the higher pressure, at a pressure of 6 bar of 127.333 μm. Microhardness showed that the 6 bar pressure indicating hardness was 639.8 HV. At 6 bar pressure also obtained the highest abrasion resistance value is 29.66 rotation / mg. The value of adhesion strength in the 4 bar pressure variables shows the optimum value compared with other pressure variations of 15.02 MPa.
Authors and Affiliations
Hariyati Purwaningsih, Rifqi Tantyo Putra, Slamet Raharjo, Agung Purniawan, Rochman Rochiem
Keywords
Related Articles
- EP ID EP275307
- DOI 10.19184/jid.v19i1.6339
- Views 126
- Downloads 0
Effect of Silica Composition from Rice Husk Ash on The Performace of Absorbing Electromagnetic Wave on Composite of Unsaturated Polyester Resins/Silica
This study aim is to know the effect of silica composition on the absorption of electromagnetic waves in the composite of unsaturated polyester resins (UPR)/silica. Silica raw materials have been synthesized from the res...
Synthesis Analgetic-Antiiflammation N-(4t-Buthylbenzoil)-p-Aminophenol by Using MgF2 Catalist
Synthesis of N-(4t-buthylbenzoyl)-p-aminophenol has been done by reacting p-aminophenol and 4-tert- buthylbenzoyl chloride compounds with 1% MgF2 catalyst. N-(4t-buthylbenzoyl)-p- aminophenol as an antiinflamatory analge...
Comparation of Magnetic Flux Cases Solution in Around Electrified Wire between Analytical and Computational Methods
Have analyzed comparative analytical and numerical computation solutions in the case of magnetic flux to the circular loop of radius R as far apart as H around the current I in the wire. The aim is to know how the method...
Simultaneous Determination of Magnesium (Mg2+) and Ammonium (NH4+) by Flow Injection Analysis
An automatic method for the simultaneous determination of magnesium and ammoniun by flow injection analysis is described. This analysis used two detectors, potentiometry and spectrophotometry, for the determination of ma...
FeCrMnNiCSi Coating on Grey Cast Iron FC 25 Variable Gas Pressure on Thermal Arc Spray Method
One of the important components of motor fuel engine is cylinder liner. There is a compression and friction combustion process with a piston that produces mechanical energy in cylinder liner. This process introduced seve...