Field tests of components regenerated using the MULTIPLEX technology
Journal Title: Journal of Achievements in Materials and Manufacturing Engineering - Year 2016, Vol 78, Issue 2
Abstract
Purpose: The purpose was to show the results of the field tests of components carried outusing the MULTIPLEX technology.Design/methodology/approach: The field tests have been carried out on the followingcomponents: brake expanders of Mercedes bus, a pintle of the tram trolley component, a pinfrom a casting cleaning plant element. Each of the tested elements was subject to regenerationthrough steel surfacing by welding and then chemical and heat treatment. The regeneratedelements were compared with original ones working at the same service conditions.Findings: The findings have shown significant prolongation of life of the componentsregenerated using the MULTIPLEX technology in relation to the original components.Research limitations/implications: The shown regeneration technology is the costeffective way to restore the suitable performance traits or to ensure preventively the suitableproperties by initial protection of newly manufactured elements or regeneration of old oneswithin the framework of recovery procedure.Originality/value: The shown regeneration method is the advanced technology combiningwelding with chemical and heat treatment.
Authors and Affiliations
L. Klimek, A. Krasiński, E. Wołowiec-Korecka
Keywords
Related Articles
- EP ID EP189320
- DOI -
- Views 142
- Downloads 0
Nanoporous surface treatment of aluminium by anodisation in oxalic acid
Purpose: Well-ordered nanoporous anodic surface on aluminium substrate was obtained by anodisation method in 0.3 M of oxalic acid as an electrolyte. The objective of this perusal is to describe a system for the magnif...
The effect of laser treatment parameters on temperature distribution and thickness of laser-alloyed layers produced on Nimonic 80A-alloy
Purpose: The aim of this paper was to determine the influence of laser treatment parameters on temperature distribution and thickness of laser-alloyed layers produced on Nimonic 80A-alloy. Design/methodology/approach: In...
Low friction MoS[sub]2[/sub](Ti, W) coatings with a Ti interlayer, magnetron sputtered on silumin
Purpose: The paper presents results of the selected mechanical and tribological propertiesof the low friction MoS2(Ti,W) coatings with a Ti interlayer deposited by magnetron sputteringmethod on silumin.Design/methodology...
The dependence of the functional properties of the nanocomposite with matrix made of Epidian 100 resin due to size of reinforcement made of Fe[sub]67[/sub]Co[sub]10[/sub]Ni[sub]1[/sub]W[sub]2[/sub]B[sub]20[/sub] alloy
Purpose: Objective of the paper was to determine the effect of particle size fraction for themechanical properties of powders and magnetic fields produced powder consisting of ironbasedalloys and an epoxy resin (trade na...
Numerical analysis of friction welded titanium joints
Purpose: Friction welding is found to be a suitable candidate for joining the dissimilarmaterials. Numerical model would be helpful for proper selection of processing conditions.In the present work, a thermo-mechanical m...