Finite Element Analysis of Center Pin and Bracket of Jig – Fixture Assembly
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
The manufacturing industry caters the range of products to satisfy the ever changing market needs. To overcome the increasing production demands, the industry implies various techniques. We need a technique for increasing the production of drilling two holes on a Railway Pinion, improve the quality of product and reduce the operation time. This project aims to design the Jig and Fixture for the same. The 3-dimensional Computer Aided Model of the components is made using CATIA V5-R21 software. To study the behavior of component, simulation is carried out. Preprocessing of the CAD model is carried in Hypermesh software. Boundary conditions are applied using physical situations of the components. Finite element analysis of the components is done, and the results obtained are compared with the theoretical analysis and also with the available literature. The stresses and deformations are found within desired limits. Using FE analysis, the parts are manufactured and assembled.
Authors and Affiliations
Rajwardhan Kulthe, Viraj Mekhe, Mihir More, Sangram Nandawadekar, Vikas Deulgaonkar
Keywords
Related Articles
- EP ID EP655860
- DOI 10.24247/ijmperdaug201964
- Views 72
- Downloads 0
DESIGN, DEVELOPMENT AND EXPERIMENTAL EVALUATION OF SOLAR DRYER
A solar dryer was designed, fabricated and installed at Energy Centre, KLEF (Deemed to be University), Vaddeswaram, Guntur District of Andhra Pradesh for drying of chili. The Solar dryer mainly consists of a solar collec...
CHALLENGES OF EXPERIMENTING R1234YF REFRIGERANT FOR AUTOMOBILE HVAC SYSTEM – A REVIEW
New refrigerants are on the verge of hitting the automobile HVAC industry, on account of several threatening conditions. Zero ozone depletion potential (ODP) and low global warming potential are the major challenges look...
Structural Optimization of Lathe Machine Bed
In this paper, a machine bed is chosen for the entire investigation, for both static and dynamic burdens. At that point, examination is completed to decrease the heaviness of the machine bed, without falling apart its ba...
A Data Driven Approach of Modelling and Parameter Estimation of Boiler Drum Subsystem Dynamics
A nonlinear dynamic model of the boiler drum level system is estimated from plant data. The identified models describe the dynamic behaviour of the subsystem under a given operating condition. Both linear and nonlinear m...
MECHANICAL PROPERTIES OF GLASS/BAMBOO FIBERS REINFORCED EPOXY COMPOSITES COMPARING WITH CHOPPED STRAND MAT TREATED WITH BACTERIAL CELLULOSE
Fiber-reinforced epoxy composites have played a principal role for a lengthy time of applications for their strength, cost-effectiveness, lightweight, and degradability. An innovative method of manufacturing rigid and ro...