Finite Element Analysys of Axial Flow Turbine Blade
Journal Title: International Journal of Modern Engineering Research (IJMER) - Year 2015, Vol 5, Issue 2
Abstract
In this paper the finite element analysis of a Axial flow turbine bladefor a high tuned design was carried out. The geometry was modelled in CATI A V5 R21 and finite element analysis had been performed in AN SYS12 WB. FE analysis is was used to determine stress analysis at 15000rpm modal analysis is at slung as well a s operating condition at 700F and low cycle fatigue analysis. After performing the analysis, the safe working conditions for the axial flow turbine blade were also stated.
Authors and Affiliations
Shubham Singhmar , Mohit Kumar , Milind Gupta , Mohd. Shadiq
Keywords
Related Articles
- EP ID EP116628
- DOI -
- Views 123
- Downloads 0
Healthcare Information System – A Web Based Spatial and Aspatial Helpdesk
ABSTRACT: Healthcare related Information is a most expected area focused by the people, Organization and government. This is the system or a Website established and considered as an information system provided by t...
Real-Time Implementation of Multi-Channel Audio Crosstalk Cancellation Using Mixed Single Frequency Delay Line Filtering Algorithm
Abstract : To reproduce high fidelity audio sound and spatial reverberation characteristics, it is desired to use the long filter coefficients in audio surround systems. To implement these long filters, the existin...
Colour Rendering For True Colour Led Display System
This paper deals finding primary colours (Red, Green, Blue) depth values for each pixel in selected image or text to display the true colour of an image on the RGB LED display panel and transmitting those values to...
Prediction on Increasing the Efficiency of Single Cylinder DI Diesel Engine Using EGR System
Exhaust Gas Recirculation (EGR) System means to use the Exhaust Gas coming from Exhaust Manifold to Inlet Manifold in order to reduce the Emission of NOX which is particularly very harmful. Engine without EGR a...
Turnstile S-Shaped Dipole and Swastika Wire Antennas for VHF and UHF Applications
New wire antennas are proposed, namely turnstile S -Shaped dipole and Swastika wire antenna. The radiation characteristics are obtained using the method of moments (MoM) with one-volt delta gap source and suitable dimens...