Finite element modeling for volume phantom in Electrical Impedance Tomography
Journal Title: Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування - Year 2011, Vol 0, Issue 46
Abstract
Using surface phantom, "shadows" of currents, which flow below and under surface tomographic lays, include on this lay, that is cause of adding errors in reconstruction image. For processing modeling in studied object volume isotropic finite elements should be used. Cube is chosen for finite element modeling in this work. Cube is modeled as sum of six rectangular (in the base) pyramids, each pyramid consists of four triangular pyramids (with rectangular triangle in the base and hypotenuse, which is equal to cube rib) to provide its uniformity and electrical definition. In the case of modeling on frequencies higher than 100 kHz biological tissue resistivities are complex. In this case weight coefficient k will be complex in received cube electrical model (inverse conductivity matrix of the cube finite element).
Authors and Affiliations
I. Rybina
Keywords
Related Articles
- EP ID EP309351
- DOI 10.20535/RADAP.2011.46.72-84
- Views 63
- Downloads 0
Solution of scattering problem on dielectric wedgeplaced between metal plates by boundary element method
Solution ofscattering problem on dielectric wedge placed between metal plates by boundary element method is discussed.The problem is reduced to set of Fredholm integralequations of the first kind.The set was solved by Ga...
Searchless digital method of spectral dispersion-correlation radio direction finding for big antenna base
Searchless digital method of spectral dispersion-correlation radio direction finding for big antenna base is performed in this paper. Combination of double correlation and dispersion-correlation signal spectrum processin...
Regulated four tact transistor inductance
Marketability function of inductance is considered as a four tact structure on the base of transistors of different polarity and its analysis is conducted. Application of such structure at symmetry of it shoulders substa...
Mathematical description and formalization types of distortion in a digital communication channel with OFDM-signals
Introduction. OFDM technology is widely used in digital television, broadcasting and communication systems. The biggest OFDM advantage is its high spectral efficiency. But the high spectral efficiency needs high-quality...
QAM signal normalization by results of it demodulation with Kalman's error minimization
Introduction. The processes of signal processing in the quadrature demodulator, and the problem of input signal AGC and carrier sync PLL are considered for a relatively high speed modulation conditions. Main part. The ba...