Fishing vessels' rolling bearings reducers of diesel-reducer units: The diagnostics' results
Journal Title: Вестник МГТУ - Year 2018, Vol 21, Issue 4
Abstract
In marine power plants with medium-speed diesels, diesel-reducer units (DRU) being a combination of diesel, gearbox, shaft-generators and other aggregates that can be driven from DRU have become very popular. The basis of the DRU is the main gearbox, which serves to transfer torque to the gross line with a reduction in the speed and drive of the variable speed and alternating current generators (usually with an increase in the speed of rotation in the gear stage). Structural schemes where for the drive of shaft generators, hydraulic pumps, etc. a separate gear reducer is used driven from the main gearbox or directly from the engine have found application as well. The greatest number of revealed defects is associated with the rolling bearings that are part of the gearbox bearing assemblies, as experience in the application of non-dismantling diagnostics for the determination of the technical condition of the DRU gearboxes has shown. For diagnostics of rolling bearings, the method of vibration diagnostics is used based on the spectral analysis of the envelope of the high-frequency component of the vibration signal. The paper presents kinematic schemes of DRU of six types of fishing vessels' gearboxes with the designation of the main elements included into them. The features of the work on reducers' diagnostics have been described; the analysis of rolling bearing diagnostics for each type of gearbox has been carried out; the number of revealed defective bearings and their location in the gearbox have been indicated. Conclusions have been made about the possible causes for the rolling bearings' failure: increased speed of gear shafts, an unsuccessful design scheme, inadequate initial load capacity of the bearing or its incorrect installation leading to deformation of the bearing outer ring, axial displacement or skewing of the rings.
Authors and Affiliations
K. О. Sergeev, A. А. Pankratov
Keywords
Related Articles
- EP ID EP435363
- DOI 10.21443/1560-9278-2018-21-4-587-595
- Views 115
- Downloads 0
The influence of low-frequency electromagnetic field on the operability of gray seals
Gray seals are widely used in biotechnical systems for various purposes. In the study of the effect of an artificial electromagnetic field (EMF) with 8 Hz frequency on the performance of gray seals, the method of conditi...
Heavy metals Hg, Cd, and Pb in the body of sterlet (Acipenser ruthenus L.), the Lower Irtysh River
For assessing the possibility of using sterlet as a species-bioindicator of heavy metals' contamination in the bottom sediments, a study has been conducted on the distribution and accumulation of these pollutants in the...
Drying processes of pumpkin candied fruits in the microwave field: Studying the oscillating mode of energy supply
One of the modern trends in the food industry is the production of candied fruits and vegetables from various raw materials. In the process of production candied fruits are saturated with sugar, which partially improves...
Improving the process of grinding food products
There are a large number of studies on the grinding of various types of food raw materials, however, today there is no comprehensive approach to justifying the influence of the design and operational parameters of the gr...
Experimental estimation of effective recombination coefficients in the D-region ionosphere at high latitudes during solar eclipses by the method of partial reflections
The photochemical theory of processes in the lower ionosphere is very complicated and up to now it is not completely developed. Therefore introduction of the effective coefficients determining the total speed of several...