FORCE MODELING OF MICRO END GRINDING OF HARD AND BRITTLE MATERIALS
Journal Title: Frontiers in Manufacturing Engineering (FME) - Year 2017, Vol 1, Issue 1
Abstract
Hard and brittle materials have broad application prospects in the defense, machinery and other fields, but hard machinability is crucial for its application. A promising processing method-micro end grinding (MEG), is put forward for machining microparts made of hard and brittle materials. Forces model of MEG is necessary to understand the effects of process, microgrinding wheel properties, material micro structure, etc, thereby allowing for process planning, optimization, and control. In this paper, a predictive model for MEG is developed by combined consideration of the undeformed chip thickness and the differences between up-grinding and down-grinding, and quantitatively predicts microgrinding forces. Experimental testing in a microgrinding configuration has been pursued to validate the predictive model by comparing measurements to analytical calculations. The analytical model is seen to capture the main trend of the experimental results, and many predictions are smaller than the experimental data of micro- grinding. The average deviations in normal direction and tangential direction are analyzed lastly.
Authors and Affiliations
Kejun Wang, Fuqiang Tian, Shuo Zhang, Yan Zhao
Keywords
Related Articles
- EP ID EP404432
- DOI 10.26480/fme.01.2017.08.11
- Views 69
- Downloads 0
APPLICATION OF ADAPTIVE FUZZY SLIDING MODE CONTROL TO ALTERNATING CURRENT SERVOMOTOR SYSTEM
In the use of servo motor control system, some characteristics of motor, such as non-sinusoidal flux of motor mover caused by end effect, nonlinear friction, will make the effects of the servo system bad. So we must use...
RESEARCH ON THE SHOCK ABSORBER PERFORMANCE FOR THE HYDRO-PNEUMATIC SUSPENSION IN CRANE
The performance of suspension directly affects travel property, safety, comfort and maximum velocity of vehicles. This is much more important for the special vehicles such as crane. In this paper, theoretical analysis ha...
MODELING AND SIMULATION OF AN AUTOMATIC BALANCE OSCILLATOR MECHANISM BASED ON ANSYS
In order to solve the problem of vibration caused by unbalance dynamic, and optimize certain parameters to improve the balance adjustment device of thermostatic oscillator, this paper introduces a method to simulating th...
DATA ACQUISITION AND PROCESSING TECHNOLOGY FOR FLIGHT SIMULATOR DATA PACKAGE
In this paper, we present the data acquisition and processing technology for the flight simulator data package, which is the key stage for the development of the flight simulator data package. It is important to cooperat...
OPTIMUM DESIGN OF ARCHED ROADWAY SUPPORT STRUCTURE
Aimed at the optimum design problems of arch retaining structure, the concrete paper applies program building relevant arch retaining structural model, the simulation programs are based on the zero order optimization met...