FORMATION AND PROPERTIES OF CARBON IN POROUS SPACE OF SILICA-ALUMINA CERAMICS
Journal Title: JOURNAL OF ADVANCES IN CHEMISTRY - Year 2015, Vol 11, Issue 7
Abstract
By using of XRD, IR, SEM methods and microanalysis, it was investigated the process of carbon formation during thermo destruction of sucrose inside pores of silica-alumina ceramics in conditions of oxygen deficient. It was found that for carbon formation inside pores, temperature treatment of sucrose must be 600oC and time of heating 15 min. At such regime of carbonization, carbon material is produced in the form of islets on the surface of pores and in the form of spherical particles of different sizes. Carbon particles present a set of aggregates from chaotic graphene clusters. On surface of carbon particles is formed grapheme oxide. Obtained results show that the carbonized ceramics adsorbs in a good degree the dyes from water solution.
Authors and Affiliations
Marina Vlasova, Catalina Bustos Rivera-Bahena, Gloria Dominguez-Patino, Mykola Kakazey, Rene Guardian Tapia
Keywords
Related Articles
- EP ID EP652856
- DOI 10.24297/jac.v11i7.2196
- Views 135
- Downloads 0
SYNTHESIS, CHARACTERISATION AND APPLICATION OF PHENOL-FORMALDEHYDE RESIN BLENDED WITH SULPHONATED PHYLLANTHUS EMBLICA, LINN., CARBON
Phenol – Formaldehyde Resin (PFR) is blended with Sulphonated Phyllanthus emblica, Linn., Carbon (SPEC) in various proportions by weight percentage (0-50%w/w). A few composite cation-exchangers were prepared by varying...
Chemical and Biological Leaching Methods to Remove Heavy Metals from Sewage Sludge: A Review
The removal of heavy metals (HMs) in sewage sludge (SS) is important since sludge is often disposed or applied on farmland to enhance soil fertility. The present study reviewed two conceptual approaches (chemical and bio...
Design and Implementation of an Intelligent PI Controller for a Real Time Non Linear pH Neutralization Process
In many chemical processes, pH is one of the most important parameter and control of the pH is highly non linear due to the complex nature of processes. PID controllers are widely used in process industries to control li...
Synthesis of Anionic Surface Active Agents Containing Heterocyclic Moiety From Long Chain Fatty Alcohols
A series of novel groups of anionic surface active agent were synthesized. Synthesis of these surfactants via the reaction of long chain fatty alcohols (octyl, decyl and dodecyl) with maleic anhydride to give monoester....
Synthesis and vibrational study of phosphate-sulfate fluorapatites Ca10-xNax(PO4)6-x(SO4)xF2 (0≤ x ≤6)
   A series of phosphate-sulfate fluorapatites Ca10-xNax(SO4)x(PO4)6-xF2 has been synthesized by the solid-state reaction at high temperature. The samples were characterized using X-ray diffraction, Infrared spectr...