Fuel economy raising of alternative fuel converted diesel engines

Abstract

<p>As a result of the theoretical research, calculations of the theoretical indicated specific fuel consumption for different methods of conversion of diesel engines to gas were carried out. The traditional method of derating in the conversion of diesel engines to gas by installing additional gaskets between the cylinder head and block was considered and the method of derating due to late intake valve closing was proposed.</p><p>As a result of in vitro experimental research with different methods of conversion of the Opel X17DTL diesel engine, it was found that using the traditional method of engine derating by installing additional gaskets between the cylinder head and block, the indicated specific consumption increased, on average, by 8–9 %. But with a decrease in the compression ratio of the engine by the proposed method due to late intake valve closing, the experimental value of the indicated specific consumption not only did not increase, but decreased, on average, by 7–8 %. The reduction of the compression ratio of the engine due to late intake valve closing by the proposed method was carried out by changing the shape of the camshaft cams. To this end, the cams of the intake valves were fused and then ground to the desired profile, with which late intake valve closing occurred within the predetermined limits.</p><p>The results obtained allow optimizing the processes of conversion of diesel engines to gas and reducing the fuel consumption of converted engines, on average, by 15–17 % compared to gas engines converted in a traditional way.</p>

Authors and Affiliations

Sviatoslav Kryshtopa, Myroslav Panchuk, Fedir Kozak, Bohdan Dolishnii, Ivan Mykytii, Olena Skalatska

Keywords

Related Articles

Examining a possibility of using purple amaranth in the technology for products made of yeast dough

<p>It was experimentally found that additives of purple amaranth (APA) have high enzyme activity, which is proved by high activity of the amylase complex: maltose number of 5 % water extract from dry foliage of purple am...

Detection of regularities in the parameters of the ateb­gabor method for biometric image filtration

<p>The study has developed a new image filtering method based on Ateb-Gabor. The method involves the well-known Gabor filter that helps convert images with clear contours. Therefore, this method is applicable to biometri...

Research into the influence of vertical drainage elements on the operational efficiency of rapid filters

To improve the efficiency of removal of suspended solids at rapid filters, we designed improved structure of the device. The improvement is based on the application, simultaneously with a granular filter layer, of vertic...

Studying the influence of uv adsorbers on optical characteristics of light-protective polymer films for textile materials

<p>The use of UV adsorbers included in composition of a polymer film is a promising way of color protecting against effects of light since application of the polymer to the textile material surface is a universal way of...

Development of the technology for the spectral noise control of the vibration conditions of offshore platforms

<p>Because of the shortcomings in both control and diagnostic systems, the accident rate for offshore oil and gas extracting facilities remains unreasonably high. Accidents are often caused by the errors resulting from t...

Download PDF file
  • EP ID EP528099
  • DOI 10.15587/1729-4061.2018.139358
  • Views 75
  • Downloads 0

How To Cite

Sviatoslav Kryshtopa, Myroslav Panchuk, Fedir Kozak, Bohdan Dolishnii, Ivan Mykytii, Olena Skalatska (2018). Fuel economy raising of alternative fuel converted diesel engines. Восточно-Европейский журнал передовых технологий, 4(8), 6-13. https://europub.co.uk/articles/-A-528099