GEARING WITH INCREASED TEETH WEAR RESISTANCE
Journal Title: Проблеми тертя та зношування - Year 2018, Vol 79, Issue
Abstract
The most important criterions of gearing efficiency are teeth wear resistance. The or-der of synthesis of rack cutter instrument for manufacture of gears with increased teeth wear resistance is considered. It is based on the model of teeth wear of closed gearing that works in oil reservoir. The differential equation is derived; its solution determines geometrical parameters of original profile. The parameters depend on setpoint of comparative teeth wear of synthesizing gearing and involute gearing. The finding so-lution is used for creation of equation of working teeth surfaces in toothing.
Authors and Affiliations
P. TKACH, P. L. NOSKO, O. V. BASHTA, G. O. BOYKO, Iu. TSYBRII, O. GERASIMOVA
TRIBOTECHNICAL CHARACTERISTICS OF POWDER MATERIALS BASED ON IRON AFTER BORIDING
The structure, phase composition of the boride coating deposited on the powder material SP90- D3 is studied. It is shown that borating substantially increases the wear resistance of the powder material.
INFLUENCE OF CONTACT FRICTION IN PROCESS RE-PRESSING POWDER MATERIALS BASED ON IRON
The influence of external contact friction briquettes from iron powder in the wall at a press tool re-pressing. The effect of re-pressed on the increase in the density of powder briquettes. The role of lubrication and th...
THE ELECTRO-MECHANICAL ACTION TO THE HETEROGENEOUS SYSTEM STRUCTURAL ELEMENTS
The results of studies under electro-mechanical action for structure elements of disperse objects and living organisms are shown. On the example of the cavitation magnetohydrodynamic resonator model, an opinion was expre...
THE INFLUENCE OF STRUCTURAL AND TECHNOLOGICAL FACTORS ON THE STRENGTH OF CARBON FIBER
There were made the researches of the most typical reinforcement schemes and generation mode on dissipation of carbon fiber resistance capabilities. And there is shown that the coefficient of variation in the carbon fibe...
THE POSSIBILITY OF THE INTENSIFICATION OF THE HEAT TRANSFER IN FRICTION UNITS OF BAND-BLOCK BRAKES OF THE DRAW-WORKS
The limiting the heating elements of friction units of the band-block brakes of the draw-works is one of the most significant tasks of the parametric synthesis and design of friction pairs. The intensification of the hea...