GEOMETRY OPTIMIZATION OF WATER-JET MACHINE CUTTING HEAD USING FINITE ELEMENT METHOD
Journal Title: Informatyka Automatyka Pomiary w Gospodarce i Ochronie Środowiska - Year 2014, Vol 4, Issue 2
Abstract
The article presents optimization process of water-jet cutting head geometry using ANSYS Workbench software. The aim of study was to examine influence of specific dimensions on output abrasive stream flow parameters. Statistical analysis of the results will help to reduce the complexity of the model in the later studies by omitting irrelevant parameters.
Authors and Affiliations
Maciej Szczepanik
Keywords
Related Articles
- EP ID EP73177
- DOI 10.5604/20830157.1109376
- Views 92
- Downloads 0
SWIRL FLOW ANALYSIS BASED ON ELECTRICAL CAPACITANCE TOMOGRAPHY
This paper describes an application of dual-plane Electrical Capacitance Tomography (ECT) system for gas-solid swirl flow measuremetns. The angular component of the velocity in the pipes cross section was calculated...
MONITORING AND ENVIRONMENTAL RESEARCH OF AIR QUALITY WITH THE USE OF MASS SPECTROMETRY
In the paper the use of mass spectrometer Prisma Plus QMG 220 2M for mobile monitoring of air in the regional research of environmental pollution is presented. The spectrometer with quadruple filter is addressed and the...
RELIABILITY ANALYSIS OF PWR REACTOR PROTECTION SYSTEM
The aim of this work was to assess the probability of the Westinghouse PWR reactor protection system (RPS) unavailability. The reference facility for which the analysis has been made was Surry Nuclear Power Plant located...
BADANIA TEORETYCZNO-EKSPERYMENTALNE PRZEPŁYWU PŁYNU NIEŚCIŚLIWEGO PRZEZ KRYZĘ SZCZELINOWĄ
W praktyce pomiarowej coraz częściej stosuje się prototypowe rozwiązania konstrukcyjne przepływomierzy zwężkowych. Na uwagę zasługują kryzy szczelinowe, gdzie jeden centralny otwór zastąpiony jest szczelinami. W pracy pr...
The energy efficiency of photovoltaic systems - selected issues
In the article there is consideration of increasing the amount of energy generated from photovoltaic system when changing parameters. The basic configurations of stand-alone and grid-connect photovoltaic systems were des...