Granulation of sodium silicates by pressing method
Journal Title: CHEMIK nauka-technika-rynek - Year 2012, Vol 66, Issue 5
Abstract
The preliminary results of studies of sodium silicate granulation by pressing method was described. The studies was conducted to test the possibility of obtaining the powdery raw material granules with a specific particle size distribution. In laboratory studies powdered sodium silicates with module of 2 up to 3.3 SiO2 moles/Na2O moles were used. They were investigated in the AWPMA’s matrix press. The studies determined the impact of compaction pressure on the densification degree and the optimal compression pressure of tested silicates was determined. The products of larger grains and higher bulk densities were obtained. The results allow the selection of industrial equipment for granulation of sodium disilicates as the main product and the possibility of obtaining granulated silicates of other module at the same time.
Authors and Affiliations
Ewa Kużdżał, Barbara Walawska, Jacek Kwiecień
Keywords
Related Articles
- EP ID EP161104
- DOI -
- Views 70
- Downloads 0
Physicochemical properties of fertilizers available on market and possibility of production of blended fertilizers
The paper discusses the methods and the results of research of physical and chemical compatibility of selected fertilizer mixtures and the evaluation of their possibility for production of blended fertilizers.
Fertilizing in containers with exploiting different forms of gardening
Fertilizing is one of the most important agro-technological treatments in the container cultivation of the gardening materials of the ornamentals. One should apply every of fertilizers in closely determined dose, adapted...
Modelling and configuration of electricity and heat generation systems using gas from underground lignite gasification
The article presents the simulation results of work of two models of energy management systems of gas from underground lignite gasification. Simulations were carried out in both cases for the variant of energy a...
Determination of selected UV filters in water samples
Methods for the determination of selected UV filters in water and wastewater samples have been presented. Procedure for enrichment and isolation of two UV filters from water and wastewater samples was described. Gas chro...
Commonness of nanosilver application as an environmental risk factor
Silver nanoparticles have the strong bactericidal, fungicidal and virucidal properties. Because of its properties they are widely used in many of daily life products, for example medical, cosmetic, textile and househo...