Grid Monitoring using Solar SCADA Dataset
Journal Title: IOSR Journals (IOSR Journal of Electrical and Electronics Engineering) - Year 2018, Vol 13, Issue 5
Abstract
Grid is framed as a planned nationwide network that makes use of information so as to deliver electricity in an efficient, reliable and secure manner. This entire electrical system is very difficult to monitor because any rise or fall of electrical impulses, in this system may result in the damage of highly expensive electrical components, as a result causes failure to an entire system. Therefore, there is dire need of controlling such damage of these synchronous machines and other component appliances so that these failures are avoided, which may result in loss of life and property. We have used various data mining approaches on a SCADA dataset which has been derived from solar electric power plant and is being monitored by grid station. The data pertains to the real time values pertaining to voltage and current. The proposed research uses this real time data for constructing a probabilistic model to respond to the above problem in a very intelligent manner.
Authors and Affiliations
Syed Fajar Hazrat, Pooja Khatri, Muheet Ahmed Butt, Majid Zaman
Keywords
Related Articles
- EP ID EP421912
- DOI 10.9790/1676-1305023948.
- Views 156
- Downloads 0
A Review of Speed Control Methods of Induction Motor
Induction motors do not run at synchronous speed, they are generally fixed speed motors. In Industries mechanical loads should not only be driven but should also be driven at desired speed. Therefore, the need of speed c...
Power Quality Investigate by Using the Varying of Voltage Parameter
To evaluate the power quality of a power system which is necessary to monitor the power quality of the power supply environment. The purpose of monitoring is mainly to determine power quality problems or to assess power...
An Optimal Gated Integrator Circuitrybased On Dummy Switch,For High-Resolution Energy Spectroscopy.
Modern experiments in the physical sciences use electronics to monitor, digitize and store analog signals. We will consider the analog front-end of ion beam detector whose job is to solve the ballistic deficit problem by...
Two-Zone Control of Direct Current Electric Drive
The speed regulation from zero to limit value in direct current electric drives is done by means of increasing armature voltage from zero to nominal value. It is called the speed regulation in first zone. The speed regul...
Vertical-Edge-Based Car-License-Plate Detection Method
Vehicle plate recognition is a successful image processing technique used to recognize vehicles' plate numbers. There are several applications for this method which enlarge through many fields and attention groups. Vehic...