Guidance and Control of a Two-dimensional Model of a Surface-to-Air Missile Using Proportional, Integral, Derivative and Optimal Fuzzy Control
Journal Title: Aerospace Mechanics - Year 2023, Vol 19, Issue 4
Abstract
the missile guidance and control system consists of three subsystems: navigation, guidance, and control. These sub-systems are responsible in the calculation of the deviation of the guided vehicle from the desired path so as to determine the appropriate acceleration command to compensate for the deviation and tracking the acceleration and direction of the missile towards the target. In the usual methods of designing the guidance and control system, each of the guidance and control subsystems is designed separately, assuming ideal subsystem. In the integrated guidance and control approach, the guidance law is developed separately and tested with the assumption of an ideal autopilot. The autopilot is also designed independently and is tested with the assumption of ideal guidance law. This article describes the process of designing and simulating the function of proportional, integral, derivative and optimal fuzzy controller, which is created in order to guide the missile in a two-dimensional problem of minimizing the impact time and the distance to the target. In the optimal fuzzy hybrid controller, Mamdani type fuzzy controller parameters (including input and output membership functions, fuzzy reasoning rules, and input and output gains) are set by solving an optimization problem. Next, the parameters of the proportional-integral-derivative controller of the parallel type are also determined by solving the non-convex optimization problem and it is shown that this type of controller with optimal parameters will provide an optimal guide to the missile.
Authors and Affiliations
Mohammad Mahdi Soori,Seyed Hossein Sadati,
Keywords
Related Articles
- EP ID EP731054
- DOI -
- Views 70
- Downloads 0
Experimental Study on the Effect of Adding Multi-walled Carbon Nanotubes on the Ballistic Limit of Fibers Metal Laminates
In this paper, the effect of multi-walled carbon nanotubes (MWCNTs) on the ballistic limit of fibers metal laminates (FML) Exprimentaly investigated. For this purpose, the MWCNTs were added with weight percentages of 0.2...
Thermal Buckling and Postbuckling Analysis of Plates Reinforced with Graphene Platelets Using Differential Quadrature Method
In this article, the thermal buckling and post-buckling of functionally graded plates with a matrix of isotropic polymer reinforced with graphene platelets (GPLs) have been investigated. In these multilayer plates, the t...
Design and Experimental Implementation of an Adaptive Feedback Linearization Controller Based on Extended State Observer for a Flexible-joint Arm
This study deals with the design and experimental implementation of an adaptive feedback linearization controller for a flexible joint lever-arm (FJLA) in the presence of uncertainties and external disturbances. An exten...
Guidance and Control of a Two-dimensional Model of a Surface-to-Air Missile Using Proportional, Integral, Derivative and Optimal Fuzzy Control
the missile guidance and control system consists of three subsystems: navigation, guidance, and control. These sub-systems are responsible in the calculation of the deviation of the guided vehicle from the desired path s...
Analysis and Comparison of Linear, Feedback Linearized and Backstepping Controllers Based on Quaternion in Spacecraft Attitude Control
In this paper, the attitude control design and analysis of a spacecraft as a rigid body based on three controllers of linear, nonlinear based on feedback linearization and backstepping is presented. According to the glob...