Heat Transfer Analysis of Second Grade Fluid Over a Stretching Sheet Through Porous Medium Under the Influence of Chemical Reaction Parameter
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
Evaluation has been done to study heat transfer of a second grade fluid through porous medium under the influence of chemical reaction parameter over a linear impermeable stretching sheet. Similarity transformations are being used to reduce the governing differential equations to ordinary ones which are solved numerically. Effects of different parameters were studied on the fluid flow. The results of stream and heat transfer were shown graphically
Authors and Affiliations
K. V. CHANDRA SEKHAR
Keywords
Related Articles
- EP ID EP280004
- DOI 10.24247/ijmperdfeb201867
- Views 83
- Downloads 0
AN OXIDATION BEHAVIOUR OF DISSIMILAR WELDMENTS IN THE PRESENCE OF MOLTEN SALTS AT 1123K
In order to investigate the effect of Inconel 718 and ASS 316 dissimilar (thickness of 3mm) weldments made by Gas Tungsten Arc welding in the presence of molten salts at 1123K in the air. To assess the performance of the...
The Generic Compact Automatic Test Equipment(GCATE) Based on Serial Communication for Fighter Aircrafts
Different Test Equipment (TE) required for the testing of serial communication based avionics systems for different aircrafts are usually supplied by the corresponding manufacturer. So procurement and maintenance of diff...
STUDIES ON EFFECT OF WELDING PARAMETERS ON THE FRICTION STIR WELDING OF ALUMINIUM 6061-T6 BUTT WELDED JOINTS USING TAGUCHI L9 APPROACH
The two sheets of aluminum 6061-T6 alloy of size 200×150×3 (mm) are butt-welded by the friction stir welding process by varying the weld parameters such as rotational speed, tilt angle, and feed. The taguchi L9 experimen...
A Parametric Analysis of Deformation of Workpiece in Closed Die Forging
Under filling and folding are two major defects, resulting in defective parts at the forging stage or failure during service life. Folding may act as a potential starting point, for crack initiation and under filled comp...
Studies on Mild Steel Particulates Reinforced Duralumin Composite Fabricated Through Powder Metallurgy Route
In the present study Duralumin(DA) based Mild Steel particles (MSp-6% wt. and 12% wt.) reinforced composite are fabricated by cold compacting the milled powders. The mechanically mixed powders are compacted in a die cavi...