Heat Transfer Enhancement using Nozzle Inserts in a Pipe Flow
Journal Title: International Journal of Trend in Scientific Research and Development - Year 2020, Vol 4, Issue 4
Abstract
The Conventional sources of energy have been depleting at a high rate, which makes future sustainable development of energy use very difficult. Thus, researches on seeking ways to reduce the size and cost of heat exchangers have been conducted. Size and cost can be reduced by increasing the heat transfer coefficient. The increase in heat transfer coefficient can be done by many methods the common method is by Enhancement process. In this process enhancement device such as nozzles, twisted tapes etc are used for enhancing the heat transfer coefficient. In the present paper the work nozzles are used as enhancement device and Convective heat transfer in a tube is dynamically different from one without inserts. The main concept is due to insertion of nozzles in to the plain pipe and swirl motion is created and contact area decreases thereby increasing the heat transfer coefficient 'h', in the tube flow, an experimental setup is prepared and experiments are conducted by using water as a medium and results are determined. The experiments are carried for the plain pipe without any inserts at different heat input and different mass flow rates and corresponding heat transfer coefficient are calculated for each case, in the same way experiments are carried out with nozzle inserts at different heat input and different mass flow rates and corresponding heat transfer coefficient are calculated for each case. Thus, by these enhancement techniques, heat transfer rate is determined. R. Rudrabhi Ramu | P. H. J. Venkatesh | K. Leela Kumar "Heat Transfer Enhancement using Nozzle Inserts in a Pipe Flow" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020, URL: https://www.ijtsrd.com/papers/ijtsrd31002.pdf
Authors and Affiliations
R. Rudrabhi Ramu | P. H. J. Venkatesh | K. Leela Kumar
Keywords
Related Articles
- EP ID EP686381
- DOI -
- Views 133
- Downloads 0
Design and Analysis of Hook Nut for a 75 Tonne EOT Crane
Electric Overhead Travelling EOT Crane is used to carry a heavy load in the industry. Due to the convention of heavy metal sat very high temperature, a Foundry requires cranes to transfer loads from one point to another....
Antimicrobial Susceptibility Profile of Escherichia Coli Isolates from Urine Cultures in Patients that Attended the Regional Hospital Bamenda with Urinary Tract Infections
Empirical antimicrobial therapy for urinary tract Escherichia coli infections in the Bamenda community and its environs where the Bamenda Regional Hospital is located, is of major importance since it has helped to obtain...
Titrimetric Analysis of Acelofenec Sodium by using Mixed Solvency
Titration is a method of quantitative chemical analysis which can be used to determine the concentration of a known reactant. Mixed solvency has been widely used to enhance the aqueous solubility of a large number of poo...
Waste Plastic’s Effect on the Deterioration of Bituminous Mixes in Cold Climates
The modifications in bitumen can be carried by addition of various types of additives. Polymers can be categorized as one of the types of additive. By the addition of Polymers to the bitumen, the temperature susceptibili...
Technology in Solar Power Systems
Solar power is one of the main sources of electricity used in our day by day life. Solar based energy resolves the shortage of electricity to great extent and covers most of the consumers belonging to backward category....