Hydrothermal mode of the flowthrough reservoircooler with respect to its morphometric changes
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 2, Issue 10
Abstract
<p>We carried out hydrothermal investigations of the flow-through reservoir-cooler with running water of the thermal power plant. The purpose of the study was to investigate a degree of silting of the flow-through reservoir-cooler of TPP for the operation period and an effect of morphometric changes of RC on its temperature and temperature of circulating water. The peculiarity of the circulating water supply of this thermal power plant is that two channels carry out the discharge of circulating water into the reservoir ‒ to the tail part of it and to the head part, near the water discharge facility.</p><p>The volume of silting of the Dobrotvir reservoir during the operation period is 0.88 million m<sup>3</sup>, the total volume decreased by 9.6 %. The depths up to 2 m increased by 28 %. The area of the reservoir decreased by 1.56 km<sup>2 </sup>as a result of silting and overgrowth of coastal water area.</p><p>Circulating water in the near water area of its discharge into the reservoir cools by 3‒4 <sup>о</sup>С, that is, by ≈50 % of the total value. Over the operation period, the near water area became shallow, but this did not affect temperature performance of the reservoir.</p><p>We recommended the formula for forecasting a temperature of water discharged from flow-through reservoir to a river, which is important for the summer period. The discharge of circulating water for cooling by two channels ‒ to the upper and to the catchment water area of the flow-through reservoir-cooler increases its active area. It is possible to provide sanitary norms regarding the thermal pollution of the river below the reservoir-cooler by regulation of the discharge of deep layers of water by discharge facility in summer.</p><p>The results of research can be useful for operation of reversible systems of technical water supply with reservoirs-coolers. They are important for regulation of redistribution of circulating water of a thermal power plant to a water area of a reservoir-cooler, as well as for operation of their discharge facilities in flow-through reservoirs.</p>
Authors and Affiliations
Nikolai Bosak, Oleksandr Hvozdetskyi, Roman Hnatiiv
Keywords
Related Articles
- EP ID EP527922
- DOI 10.15587/1729-4061.2018.128064
- Views 51
- Downloads 0
A method of designing of torque-flow pump impeller with curvilinear blade profile
<p>The research is devoted to energy efficiency increasing of a “Turo” type torque-flow pump by improving its impeller. This allows minimizing the total pump installation life cycle cost as a result of reducing the costs...
Construction of a parametric model of competitive access in relational databases by using a random forest method
<p>We have considered the task on modeling a request execution time in autonomous relational databases with competitive queries. The shortcomings of existing approaches have been specified, which ignore the cost of the s...
Investigation of NiAl hydroxide with silver addition as an active substance of alkaline batteries
<p class="1">Layered double hydroxides with different ratios of nickel and aluminum in the presence of Ag + ions and without silver have been synthesized: Ni: Al – 80 %: 20 %, Ni: Al: Ag – 80 %: 15 %: 5 % and 75 %: 15 %:...
Development of procedure for assessing the degree of enviromental hazard from the sources of aquatic environment pollution
<p>The new procedure for evaluation of the degree of environmental safety of water sites based on the comparison of the influence of separate point sources of sewage discharge was developed. The use of this procedure wil...
Influence of modification of the solid component on the properties of non-autoclaved aerated concrete
<p>This paper reports results of research into the modification of a solid component in the non-autoclaved aerated concrete with a lime-carbonate additive that contains calcium carbonate (calcite), calcium hydroxide (por...