IDEA OF ELECTRICAL TOMOGRAPHY SYSTEM FOR MONITORING LUNG VENTILATION
Journal Title: Informatyka Automatyka Pomiary w Gospodarce i Ochronie Środowiska - Year 2017, Vol 7, Issue 1
Abstract
In many applications of electrical tomography, such as monitoring the lungs of unconscious intensive care patients, data acquisition on the entire boundary of the body is impractical. The boundary area available for electrical tomography measurements is restricted. Physiological processes that produce changes in the electrical conductivity of the body can be monitored by hybrid algorithms. This paper presents the architecture of the system based on electrical tomography.
Authors and Affiliations
Tomasz Rymarczyk, Przemysław Adamkiewicz, Paweł Tchórzewski
Keywords
Related Articles
- EP ID EP221810
- DOI 10.5604/01.3001.0010.4595
- Views 67
- Downloads 0
A DISTRIBUTED METHOD FOR TRANSIENT SIMULATIONS THAT DYNAMICALLY CONSIDERS SUPPLEMENTARY RESULTS FROM AUTONOMOUS SOFTWARE AGENTS
Based on autonomous software agents capable of calculating individual numerical field problems, a distributed method for solving transient field problems is presented. The software agents are running on distributed resou...
SPECTRAL SENSITIVITY OF HUMAN VISION TO THE LIGHT PULSES
. In the paper we represent experimental results of the research of human vision sensitivity to pulsed radiation of discrete light emitting diodes (LEDs) of different colors when their dissipated electrical power was the...
FREQUENCY DEPENDENCE OF THE MAGNETOELECTRIC VOLTAGE COEFFICIENT IN (BiFeO3)x-(BaTiO3)1-x CERAMICS
Composition-dependent magnetoelectric properties of sintered (BiFeO3)x-(BaTiO3)1-x ceramics have been recently observed and reported in the literature. Measurements of the magnetoelectric effect (ME) for these materials...
DEAD TIME MEASUREMENT BY TWO-SOURCE METHOD – OPTIMIZATION OF MEASUREMENT TIME DIVISION
The article presents the analysis of the dead time measurement using two sources for a non-paralyzable detector. It determined the optimum division of count rate measurement time between both source measurement and a sin...
ZINTEGROWANY PROCES DECYZYJNY UWZGLĘDNIAJĄCY RYZYKO W PRZEMYŚLE JĄDROWYM
Organ regulacyjny, powołany w celu zapewnienia bezpieczeństwa jądrowego, jest odpowiedzialny za podejmowanie decyzji i wprowadzanie rozporządzeń dla przemysłu jądrowego. Tradycyjny sposób jego funkcjonowania opiera się n...