Identification of Control System for ProcessVariations of Extruders - A Survey
Journal Title: Scholars Journal of Engineering and Technology - Year 2017, Vol 5, Issue 11
Abstract
The extrusion of PVC polimers with a single screw has been studied. Experimentally, the pressures and temperatures were measured at the end of each stage, for different processing conditions (screw speed, die geometry etc.). Screw pulling experiments have allowed to observe the partially filling of the screw sections. The evolutions of the pressure and the temperature all along the screw, as well as the filling length of the screw are then obtained. The theoretical results are in good agreement with the experimental measurements. When characteristics of the system are examined, it becomes clear that a commonly used proportional plus integral plus derivative PID controller cannot meet such performance speciļ¬cations for this kind of system. In order to achieve the required performance, a control strategy that parameter PID is formulated. This control strategy proves to be very effective in achieving the referred speciļ¬cations.
Authors and Affiliations
Bekir Cirak
Keywords
Related Articles
- EP ID EP386666
- DOI -
- Views 88
- Downloads 0
A Microcontroller Based Security System
According to the popular philosopher - Abraham Maslow, security is the second most basic need of man. There is need to protect life and property, in order to do this a security system must be developed. The purpose of th...
Multi-Block Structured Grid Generation Method for Computational Fluid Dynamics
Multi-block structured finite element grid generation algorithm is developed in conjunction with a homotopy technique. The computational domain is divided into a number of quadrilateral regions that takes into considerat...
Sobol' sensitivity indices of the structural parameters of symmetry arch under radial limit loads
Sensitivity analysis allows us to investigate the role, the contribution of the input factors to the objective output function. The results of the sensitivity analysis help the designer adjust the reliability of the stru...
Investigation of Flowing Properties of Novel Drilling Fluid
The objective of designing drilling slurry for extreme and deep environment (HPHT wells) is to develop high performance drilling fluid system in well bore to achieve zonal isolation. The primary objective of drilling slu...
Functional Properties of Water Holding Capacity, Oil Holding Capacity, Wettability, and Sedimentation of Swell-Dried Soybean Powder
Functional properties of expanded granule soybean powder issued from swell-drying were studied and compared with those of conventional ground powder. Swell-dried soybeans were textured by Instant Controlled Pressure Drop...