Imitation modeling for the investigation of the loaded lock of mobile versta - work
Journal Title: Вісник Тернопільського національного технічного університету - Year 2017, Vol 88, Issue 4
Abstract
In this article the issues of dynamic analysis of the executive branch of the machine system are considered. The analysis of the design scheme consisting of the spatial system, suspended in space on the flexible elements, was carried out. The mathematical description of the harmonic oscillator, which is the executive link of the mobile machine, is obtained. A simulation model was created in the Simulink computer environment to study the dynamics of the loaded executive of the mobile machine. The reaction of the model to forced harmonic oscillations, which has quasi-random character, with sinusoidal influence, is obtained. The obtained result suggests that in the operating unit of the mobile machine there are oscillations with a wide frequency and amplitude spectrum, which can cause resonance of elements of the technological system in a wide frequency range.
Authors and Affiliations
Sergii Kovalevskyy, Olena Kovalevska
Keywords
Related Articles
- EP ID EP280397
- DOI 10.33108/visnyk_tntu2017.04.129
- Views 27
- Downloads 0
Forced vibrations of piezoceramic cylindrical shells
This paper is devoted to the analysis of the forced vibrations problem for piezoceramic cylindrical shells in the form of short and high rings with radial polarization. Simultaneously a new simple technique for an experi...
Longitudinal - angular oscillation of wheeled vehicles with non-linear power characteristics of absorber system
An in parameterized form of analytical dependences that describe the parameters defining a longitudinally - angular oscillation of the sprung wheeled vehicles. It is shown that for wheeled vehicles for special purposes f...
Analysis of the fuel and energy complex of Ukraine
The authors analyzed the prospects and directions of these components industry that are based on analysis of specific performance of the fuel and energy complex of Ukraine in general and in particular the coal industry f...
Contact interaction of the parabolic punch with preliminary stressed plate fixed on the rigid basis
Solution of the contact problem on the interaction of the punch with preliminary stressed thick plate is presented in the article. Analytical solutions for the plate were found while it’s modeling by the preliminary stre...
Experimental research of deformation zone of adaptive clamping elements for lathe jaws chucks
The paper deals with the experimental research of clamping surface deformation zone of adaptive clamping jaw to equip lathe jaws chucks during machining work pieces of different diameters. The directly proportional displ...