Impact of the feed force on discontinuity of wood cutting with petrol chainsaw
Journal Title: Annals of Warsaw University of Life Sciences- SGGW - Agriculture - Year 2015, Vol 66, Issue 66
Abstract
The article presents results of the research on the impact of the feed force on discontinuity of the process of wood cutting with petrol chipper type saw. Analysis of discontinuity was conducted on basis of analysis of variability of instantaneous values of the feed force. Pine wood was used for research purposes. It was found that the wood cutting process was discontinuous process. At times none of the chains performs the wood cutting function. The share of pauses in cutting depends on the feed force applied.
Authors and Affiliations
Adam Maciak
Keywords
Related Articles
- EP ID EP76482
- DOI -
- Views 151
- Downloads 0
Impact of working parameters on loading of stone rake rotor
The objective of this study was to determine the impact of the kinematic coefficient and the angle of positioning of the stone rake rotor upon its torque. Research was conducted in a soil bin. In order to achieve the obj...
The impact of initial tension on rapidity of dulling of saw cutting chains during cross-cutting of pine wood
The article presents results of research, aimed at comparison of rapidity of dulling of saw cutting chains depending on the initial tension level. Research was conducted during cross-cutting of moist pine wood. Measureme...
Impact of the feed force on discontinuity of wood cutting with petrol chainsaw
The article presents results of the research on the impact of the feed force on discontinuity of the process of wood cutting with petrol chipper type saw. Analysis of discontinuity was conducted on basis of analysis of v...
The method of determination of the safety zone between the rototiller cover and rotor
The objective of the study was to develop an analytical method of determination of the safety zone between the rear cover and the rotor of the rototiller for various cover types. Using the sizes and relationships between...
Changes in the parameters of the transfer function of a twin screw extruder
The objective of this work was to determine the static characteristics and then the transfer function of the process of extrusion for selected process variables, such as screw rotational speed (n) and raw material flow r...