IMPLEMENTATION APPROACHES DURING SIMULATION OF ENERGY PROCESSES FOR A DYNAMICALLY POSITIONED SHIP
Journal Title: Електротехніка і Електромеханіка - Year 2015, Vol 0, Issue 6
Abstract
Purpose. Creation of a mathematical model of the ship's power plant (SPP) combined propulsion complexes (CPC) that takes into account the behavior of all objects, including the ship itself, the transfer of power from the medium speed diesel generators on the propellers, which will allow to take into account the hydrodynamic properties of the vessel and their impact on the energy processes in SPP CPC. Methodology. The analysis of energy processes in the SPP CPC in different operating conditions resulted in creation of a strategy for constructing mathematical models of SPP CPC. This strategy is based on the implementation on the vector plane resulting power characteristics of SPP vectors disturbances, leading to the deviation of the hydrodynamic characteristics of the ship during operation dynamic positioning. The result allowed to consider not only the features of setting PID-governors of frequency converters of electric thrusters but the automatic voltage regulators of medium speed diesel generators as well. Results. Within the research work a software package Ships_CPC in MatLab/Simulink was developed under the state budget project «Concepts, technologies and ways of improving ship power plants combined propulsion complexes» at the Department of Electromechanics and Electrical Engineering of Odessa National Maritime Academy. Originality. This complex represents a set of functional blocks of the components SPP CPC, built on the principle of «input-output». The simulation results demonstrate the ability to use software package Ships_CPC to study the effect of various settings on the energy regulators of processes SPP CPC, which can develop and integrate the different strategies of automatic voltage regulators. Practical value. Since software complex Ships_CPC was developed under Open system technology, it can reorganize, re-tune and integrate in processes of any difficulties with further completion in the form of a universal structure.
Authors and Affiliations
V. V. Budashko
Keywords
Related Articles
- EP ID EP299139
- DOI 10.20998/2074-272X.2015.6.02
- Views 88
- Downloads 0
A DETERMINATION OF THE FLUX DENSITY IN CORE OF DISTRIBUTION TRANSFORMERS, WHAT BUILT WITH THE COMMON USING OF GRAIN AND NON GRAIN ORIENTED MAGNETIC STEELS
Purpose. The development of calculation method to determinate the flux densities in different parts of the magnetic cores of distribution transformers, what built from different types magnetic steel (mixed core). Methodo...
ON ELECTROSTATIC ANALOGY OF MAGNETOSTATIC FIELD IN INHOMOGENEOUS MAGNETIZED MEDIUM
Purpose. The application in electrostatic analogy of magnetostatics for inhomogeneous magnetized media of two known magnetization models. Methodology. A comparison of basic equations and formulas of electrostatic and mag...
THE PROBLEM OF CORRECT CHOICE OF FERRITE BEADS
A ferrite bead is a passive electrical element used to suppress high-frequency noise in electric circuits. This is one of the simplest and the cheapest type of filters. Thus, such filters are widely used in electric and...
BRUSHLESS VALVE ELECTRIC DRIVE WITH MINIMUM EQUIPMENT EXCESS FOR AUTONOMOUS FLOATING VEHICLE
Purpose. Development of a brushless valve electric drive with a minimum apparatus excess for an autonomous floating vehicle. Methodology. The construction of models of an automated electric drive with a contactless DC mo...
SOME FEATURES OF DYNAMIC CHARACTERISTICS OF BUMPERS WITH PERMANENT MAGNETS
This article describes the features of the dynamics of the bumper with permanent magnets. Pictures of the magnetic field in 3D are presented, transients are calculated. It is shown that operation of this system depends o...