Implementation of an Automatic System for the Monitoring of Start-up and Operating Regimes of the Cooling Water Installations of a Hydro Generator

Abstract

The safe operation of a hydro generator depends on its thermal regime, the basic conditions being that the temperature in the stator winding fall within the limits of the insulation class. As the losses in copper depend on the square current in the stator winding, it is necessary that the cooling water debit should be adapted to the values of these losses, so that the winding temperature falls within the range of the values prescribed in the specifications. This paper presents an efficient solution of commanding and monitoring the water cooling installations of two high-power hydro generators.

Authors and Affiliations

Ioan Pădureanu, Marcel Jurcu, Ladislau Augustinov, Cornel Hațiegan, Eugen Răduca

Keywords

Related Articles

Performance Evaluation of an Egusi-melon Washing Machine

Traditionally, woven basket in the flowing water stream with heaps of melon balls at the washing site is being employed in washing of Egusi-melon seeds in most local settings in Nigeria. This traditional melon washing me...

Development of a WormCAD using Parametric Design Approach

Gears as power transmission devices are capable of changing the speed, torque, and direction of a power source and are considered to be one of the most important devices used in many types of machinery owing to their dur...

The Hill Chart Calculation for Pelton Runner Models using the HydroHillChart - Pelton Module Software

he Pelton turbines industrial design is based on the hill chart characteristics obtained by measuring the models. Primary data measurements used to obtain the hill chart can be processed graphically, by hand or by using...

Long Silver Nanowires Synthesis by Pulsed Electrodeposition

Silver nanowires were pulse electrodeposited into nanopore anodic alumina oxide templates. The effects of continuous and pulse electrodeposition waveform on the microstructure properties of the nanowire arrays were studi...

Numerical Study of Shear Stress Around an Ideal Roughness

In EHD lubrication conditions the viscosity of the lubricants increases, occuring at high shear rates of plastic behavior. Previous researches showed that the shear stress in the film thickness of the lubricant may vary,...

Download PDF file
  • EP ID EP449040
  • DOI -
  • Views 75
  • Downloads 0

How To Cite

Ioan Pădureanu, Marcel Jurcu, Ladislau Augustinov, Cornel Hațiegan, Eugen Răduca (2015). Implementation of an Automatic System for the Monitoring of Start-up and Operating Regimes of the Cooling Water Installations of a Hydro Generator. Analele Universitatii "Eftimie Murgu" Resita. Fascicula de Inginerie, 22(1), 359-368. https://europub.co.uk/articles/-A-449040