Implementation of an Enhanced Wilkinson’s Power Divider using Low Pass Filters
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2017, Vol 5, Issue 7
Abstract
A novel design of power divider using pi-filter is proposed in this paper which suppresses the harmonics in the circuit. There are several advantages of using this design. The simplicity of the circuit is enhanced as the open circuited shunt stubs are used in Pi-filter. 3 GHz is the frequency that is used throughout the process as the operating frequency. The target of this implementation is to get an equal power division through the proposed power divider. On simulating the proposed design on AWR Microwave office suite, it was observed that the harmonics were suppressed above 3 GHz. The substrate that is used here for the implementation have the following specifications: Loss tangent = 0, thickness of the substrate = 1.6 mm, dielectric constant = 2.2 and metal thickness = 0.05 mm.
Authors and Affiliations
Yashas Joshi, Smridh Malhotra
Keywords
Related Articles
- EP ID EP24854
- DOI -
- Views 441
- Downloads 16
Analysis of Trust Dynamics in Cyclic Mobile Ad Hoc Networks
Mobile Adhoc networks are gaining popularity in today’s dynamic environment. These are characterized by high mobility, infrastructure less, self-organizing, quick deployability and resource constrained networks. The net...
Section Optimization of Diaphragm Wall.
Diaphragm wall is common type of earth retention system. Diaphragm walls are generally used in deep basement of building, congested urban spaces, riverfront structures and marine structures. The stability is provided th...
Smart Materials: An Overview of Shape Memory Alloys for the analysis of strength & resistance
World is progressing in all spheres of life be it Science, art or Culture or any other field. The field of manufacturing which is highly monolithic & complicated has directed our need towards the materials that have the...
Design of Milling Fixture for Differential Case
Over the previous century, fabricating has gained impressive ground new machine apparatuses, superior cutting devices and present day producing forms empower today's commercial enterprises to improve parts quicker and t...
Multi-Response Optimization of Process Parameters Based On MRSN for D2 Steel Using WEDM Process with Plain Brass Wire and Zinc Coated Brass Wire
Wire Electrical Discharge Machining plays an important role in precision machining. The material removal rate, higher the best and surface finish, lower the best, are mostly required as output response. But it is a well...