Improve Gasoline Octane Number and Studying Reid Vapor Pressure Effect and Calorific Value by using Environmental Additives
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 5
Abstract
An assessment for the addition of DO and DOA on the octane number and Reid vapor pressure (RVP) of gasoline with different chemical compositions. The locally produced gasoline was blended with three different ratios (v/v) of the additives, i.e. 8, 10 and 15%. The octane rating of gasoline was found increasing continuously and linearly with addition of DO and DOA. The DOA-gasoline blends produced higher octane number. The two additives observed the significant decreasing of the RVP and CV of the original fractions when mixed with gasoline. However, the additives were added in 8, 10, 15%vol to gasoline blend, the increasing RON was 0.9–23.9.
Authors and Affiliations
Husham Mohammed Al. Tameemi
Keywords
Related Articles
- EP ID EP672256
- DOI 10.24247/ijmperdoct201971
- Views 72
- Downloads 0
Global Form Deviation Evaluation of Free-Form Surface using Coordinate Measuring Machine
In the modern manufacturing, free-form surface evaluation for confirmation the quality of produced as compare to the CAD model is crucial topic. A free-form surface is evaluated using contact and non-contact measuring in...
Study of Mechanical Properties of Open Cell AL6061 Alloy Foam
The mechanical behavior of 20 ppi open cells Al6061 alloy foam is studied under uniaxial tensile, compression and bending loads. In addition to the common stress–strain measurements, peak load, ultimate stress, displacem...
Energy Output Evaluation from Aphotovoltaic System at Different Selected Sites in Jordan
Solar energy is one of the best solutions for Jordan energy problems, as Jordan is a sunny country with 300 sunny days over the year. This study presents a calculation of the energy output from a PV system at six selecte...
Experimental Study on Microstructure of Friction Stir Welding of AA6061
Friction stir welding is a solid state joining method, widely used for welding the light weight alloys for air craft manufacturing, shipbuilding, automobiles and many other applications of commercial importance. Friction...
MIXED TWO SIDED COMPLETE CHAIN SAMPLING PLANS FOR MAXIMUM ALLOWABLE VARIANCE
In acceptance sampling plans, mean is commonly used for variable inspection in the production field. In some situations, the variance of the quality characteristics is used as the criterion. That is, a lot may be accepte...